(hereinafter referred to as Ultrative) exclusive ownership without the written permission of the Company, any unit or individual is not entitled to any form of copy, disseminate and reproduction in part or all of the contents of this manual, Ultrative reserves the right to charge against law.
Part I Manual Guidance 1.1 Purpose In order to help users of our devices to understand and use our UTT-110B Series GWs more effectively, hereby, we present this User Manual with our sincerity. This Manual consists of all detailed information that one need to know about the products.
Part II Product Introduction UTT-110B Series VOIP Gateway gives way to standard IP Audio/Fax/Data services, which is also called Integrated Access Device or Access Gateway. Normally, in a NGN, UTT-110B belongs to the Access Layer of the network. Its main role is to combine all network terminals into a unified web, in order to make all services possible in the network.
1) UTT-110B Series Voice over IP Integrated Access Device Modem WAN port directly connected with ADSL (Cable), as shown in Figure 2-4. 2) UTT-110B Series Voice over IP Integrated Access Device as a proxy server, agent in charge of the Internet.
All manuals and user guides at all-guides.com UTT-110B VOIP Gateway (SIP) User manual Figure 2-4 UTT-110B Series Integrated Access Device as a proxy server connection 2.7 Network Access Configuration Firstly confirm the connection: WAN port UTT-110B Series integrated access devices support PPPoE, dynamic IP address or a static IP address mode 2.8 Log-in to the WEB Configuration Interface...
Page 12
If the above message appears, it means that the computer and the UTT Series Voice over IP integrated access devices connected nowhere please first check your UTT-110B Series Voice over IP integrated access device is connected properly (under normal circumstances, AN port status LEDs are point bright), and then enter the "Internet Protocol (TCP / IP) Properties"...