RODCRAFT WP50P Instructions

WARNING
• Never exceed the rated capacity of the press.
• Keep unauthorised persons, particularly children, away from the work area.
• Do not introduce hands or any other part of the body in the work area.
• Always use ocular and facial protection.
• Never wear baggy clothes, ties, watches, rings, chains, etc. when using the
press.
• Long hair should be tied up.
• Prior to use, make sure the press is securely anchored.
• Use appropriate guarding to contain any pieces that may break or fly apart
when applying force.
• Use only press accessories having a capacity rating equal to or greater than
the capacity of the press.
• Verify lift cables are slack before pressing on the bolster.
• Avoid off-center loads.
• The V-blocks must be used in pair, not by piece!
• Only one person at a time should operate the press.
• The operator must wear protective cloth, gloves, safety helmet, shoes and
ear protector during operating.
• To avoid accidents, always be aware of any on-going work on the machine.
Also, always stay focused on the job to be done.
Cable
Winch
www.rodcraft.com
WP30P / WP50P / WP75P / WP100P- Instructions for lifting and lowering the table

SAFETY INSTRUCTIONS

Upper lock pins
Lower lock pins
Table
Safety
pin
8956001351 Rev.02 - 02/2017