Chapter 3 Vizio Remote Control; Installing The Batteries; Remote Control Range; Vizio Remote Control Precautions - Vizio M190MVOM User Manual

VIZIO M190MV/M220MV User Manual

Chapter 3 VIZIO Remote Control

Installing the Batteries

1. Remove the battery cover.
2. Insert two AAA batteries into the remote control.
Make sure that you match the (+) and (-) symbols on
the batteries with the (+) and (-) symbols inside the
battery compartment.
3. Replace the battery cover.
Precautionary Tips for Inserting the Batteries:
!
Only use Alkaline AAA batteries.
!
Do not mix new and old batteries. This may result in cracking or leakage that may cause
a fire or lead to personal injury.
!
Inserting the batteries incorrectly may also result in cracking or leakage that may cause a
fire or lead to personal injury.
!
Dispose of batteries according to local hazardous waste regulations.
!
Keep the batteries away from children and pets.

Remote Control Range

!
Point the remote control directly at this sensor
for the best response to the remote signal.
!
Do not place any obstacles between the remote
control and the remote control sensor.
!
The effective range of the remote control is
approximately 22 feet (7 meters) from the front
of the remote control sensor, 30° to the left and
right, 20° up and down.

VIZIO Remote Control Precautions

!
The remote control should be kept dry and away from heat sources. Avoid humidity.
!
If the TV responds erratically to the remote control or does not respond at all, check the
batteries. If the batteries are low or exhausted, replace them with fresh batteries.
!
When not using the remote control for a long period of time, remove the batteries.
!
Do not take the batteries apart, heat them, or throw them into a fire.
!
Do not subject the remote control to undue physical stress, such as striking or dropping it.
!
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean,
damp cloth.
12
www.VIZIO.com