Sony HDRAS50R/B Manual page 74

2
Press the MENU button, then press the UP button or DOWN button to select
settings) -
Select the SSID that is printed on the sticker attached to the rear of the camera's
3
battery cover with the Live-View Remote.
The connection beep sounds, then
Press the UP button or DOWN button to select
4
button.
Note
When beep is set to OFF, the connection beep does not sound.
If the connection does not complete, congestion of the radio wave might be the cause. Retry the connection
by changing the place.
[80] Using the camera connected to other devices via Wi-Fi
Connecting multiple cameras to Live-View Remote
(Multi connection)
This section explains how to connect to Live-View Remote "RM-LVR3". If you are using other Live-
View Remote, see Help Guide of the relevant remote control.
Turn on the Live-View Remote.
1
For details, refer to "Connecting the remote control to multiple cameras via Wi-Fi" in the Help
Guide of the Live-View Remote (RM-LVR3).
http://rd1.sony.net/help/cam/1650/h_zz/
Set the camera.
2
When you connect the camera to Live-View Remote for the first time
Press the MENU button, then press the UP button or DOWN button to select
settings) -
REC/ENTER button.
When the connection beep sounds and
camera using the Live-View Remote.
appears on the display panel of the camera when connecting finishes. Press the
(Wi-Fi connection setting) -
(Wi-Fi connection setting) -
, then press the REC/ENTER button.
is displayed on the display panel.
, then press the REC/ENTER
Connecting to the Live-View Remote
(multi connection) -
is displayed on the display panel, register the
(camera
(camera
, then press the