Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
INSTALL
Note:
For the first time installation, the screw must loosen before attaching the monitor to the base.
POWER
POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord one end to your LCD monitor's AC-input socket, the other end to
wall-outlet.
Figure.1. Installing and Removing the Base
REMOVE
9
User's Manual
Advertisement
Table of Contents
