Advertisement
Assembling Procedure :
First, screw the clip head (1) and fasten by the nut fixing tool.
Connect the blue pipe which is on the above of the pedal switch
socket to the above pipe connecter (2) on the main part, then
connect the orange pipe to the below pipe connecter (3)
on the main part. Press the pedal (4) to make the clip head
drop down and screw up(5) by tool(6), assembling procedure
completed.
( 3 )
(1)
Disassembling Procedure :
( 2 )
( 4 )
( 6 )
( 5 )
reverse step according to the
assembling procedure.
When the clip head can't suit the size of aluminum lip in normal use,
adjust the nut(1) to loosen or fasten.
Screw down the nut clockwise--loosen
Screw up the nut counterclockwise--fasten
Filler Co., Ltd.
Tel :(02)2593-1616
2591-6873
Fax :(02)2586-4587
( 1 )
http://www.filler.com.tw
E-mail: filler@filler.com.tw
Advertisement
