Table of Contents
Advertisement
Quick Links
INSTALLATION GUIDE
SecureMesh™ Extender
XTEN-1000
Contents
INTRODUCTION ............................................................................................................................................................................ 3
............................................................................................................................................................................................. 5
PREPARING FOR INSTALLATION .................................................................................................................................................... 6
.............................................................................................................................................................................. 6
..................................................................................................................................................................................... 7
INSTALLING THE EXTENDER ........................................................................................................................................................... 8
Mounting the Device ......................................................................................................................................................................... 9
Grounding and Protecting the Device ............................................................................................................................................. 10
Connecting the Device to a Source of Power ................................................................................................................................... 11
Completing the installation ............................................................................................................................................................. 12
Mounting the Device ....................................................................................................................................................................... 13
Connecting the Device to a Source of Power ................................................................................................................................... 15
Completing the Installation ............................................................................................................................................................. 16
I
Attaching the Optional Wi-Fi Antennas........................................................................................................................................... 17
COMMISSIONING THE EXTENDER ................................................................................................................................................. 18
APPENDIX .................................................................................................................................................................................... 19
........................................................................................................................................................................... 19
(US)............................................................................................................................................................................... 21
PL-0041A__1_1_Installation_Guide_SecureMesh_Extender_111004.docx
......................................................................................................................................................... 3
..................................................................................................................................................... 6
................................................................................................................................................................. 6
......................................................................................................................................................................... 9
........................................................................................................................................... 13
.................................................................................................................................................................. 17
.................................................................................................................................................. 18
..................................................................................................................................................... 18
) ....................................................................................................................................... 21
PL-0041A
Advertisement
Table of Contents
Related Manuals for Trilliant SecureMesh XTEN-1000
Summary of Contents for Trilliant SecureMesh XTEN-1000
-
Page 1: Table Of Contents
INSTALLATION GUIDE SecureMesh™ Extender XTEN-1000 Contents INTRODUCTION .................................... 3 ................................. 3 ECURE XTENDER OMPONENTS ......................................5 CCESSORIES PREPARING FOR INSTALLATION ..............................6 ..............................6 EQUIRED ROVISIONING QUIPMENT ................................. 6 EQUIRED UTDOOR QUIPMENT ....................................6 NSTALLATION OCATION ..................................... 7 ROVISIONING INSTALLING THE EXTENDER ................................8 .................................. - Page 2 AFETY NFORMATION Trilliant strongly urges that you always follow all locally approved safety procedures and safety instructions when working around high voltage lines and equipment. The instructions in this manual are not intended as a substitute for proper training or adequate experience in the safe operation of the equipment described.
-
Page 3: Introduction
The following diagram shows the major components of the SecureMesh Extender. water intrusion gasket Ethernet, 8P8C optional: Wi-Fi data and power access point bulkhead connector status lights serial, 8P8C grounding lug optional: Wi-Fi access point bulkhead connector side view bottom view Trilliant Incorporated page 3 of 21... - Page 4 SecureMesh Extender Installation Guide The following diagram shows the SecureMesh Extender package contents. SecureMesh Extender Optional: Wi-FI antennas Trilliant Incorporated page 4 of 21...
-
Page 5: Accessories
Indoor Power Supply w/ PoE Injector 171-R0005-01 IEC320-C13 plug for Americas 171-R0005-02 IEC320-C13 plug for UK 171-R0005-03 IEC320-C13 plug for Europe 171-R0005-05 IEC320-C13 plug for Australia 171-R0005-06 IEC320-C13 plug for Latin America Trilliant Incorporated page 5 of 21... -
Page 6: Preparing For Installation
Unit requires 90-265 VAC 50/60 Hz power. • The Extender enclosure must be mounted at least 18 feet (5.5 meters) above ground level, although radio performance and coverage will generally improve as the mounting height is increased. Trilliant Incorporated page 6 of 21... -
Page 7: Pre-Provisioning
SecureMesh WAN to the SecureMesh WAN node. The netkey is a string of 6 to 64 ASCII letters, numbers, or symbols. If IPsec VPNs are being used (and Trilliant strongly recommends their use), the following Extender parameter must also be configured: VPN credentials —... -
Page 8: Installing The Extender
As an option, Trilliant recommends that the following Extender parameters be configured in order to speed up the time required for an Extender to discover other SecureMesh WAN nodes and become part of the network: •... -
Page 9: Utility Pole Installation
Note that screws 1" in length can accommodate a pole diameter up to 1½" while screws 2" in length accommodate a pole diameter of 2 1/8”. The screws should be tightened to 20 foot-pounds (27 Newton-meters) of torque. Trilliant Incorporated page 9 of 21... -
Page 10: Grounding And Protecting The Device
Run the CAT5e cable under the gasket and plug it into the Ethernet port in the cavity on the device base (see the diagram to the right) CAT5e Ethernet Cable 8P8C Ethernet Port 8P8C serial port View of underside with cover plate removed Trilliant Incorporated page 10 of 21... -
Page 11: Connecting The Device To A Source Of Power
The Power Service Unit can be used to provide PoE power and battery backup for the Extender. Please refer to the Power Service Unit Installation Guide for more information (Trilliant document PL-0042A, Installation Guide, SecureMesh 24V PSU). Alternatively, the site may have its own Uninterruptible Power System that can be used along with a PoE injector to provide 24V power and data over an Ethernet cable;... -
Page 12: Completing The Installation
Secure the Cabling Use sturdy cable ties or Velcro wraps (not included) to secure all the cabling against strain, especially if the installation is subject to high winds. sturdy cable ties or Velcro wraps Trilliant Incorporated page 12 of 21... -
Page 13: Streetlight Pole Mounting And Grounding
Make the mounting pipe plumb (straight) by moving the main bracket from side to side and moving the plumb adjustment bracket forward and backward. The accuracy should be checked using a magnetic level. When the mounting pipe is plumb, tighten all nuts. Trilliant Incorporated page 13 of 21... - Page 14 If the streetlight is a metal arm attached to a wooden pole the ground wire must extend to a proper ground location. Ethernet PoE cable ground wire Trilliant Incorporated page 14 of 21...
-
Page 15: Connecting The Device To A Source Of Power
Replace the photocell on top of the photocell adapter; twisting clockwise until hand tight. • Coil any excess cable. Place it in the space provided under the mount stand and secure it. photocell adapter / power tap Trilliant Incorporated page 15 of 21... -
Page 16: Completing The Installation
Secure the Cabling Use sturdy cable ties or Velcro wraps (not included) to secure all the cabling against strain, especially if the installation is subject to high winds. sturdy cable ties or Velcro wraps Trilliant Incorporated page 16 of 21... -
Page 17: Optional W I -Finstallation
Use self-fusing rubber insulation and sealing tape to • wrap the antenna bulkhead connector and the antennas to avoid water penetration of any kind. Trilliant Incorporated page 17 of 21... -
Page 18: Commissioning The Extender
Installation Guide OMMISSIONING XTENDER Configuring the SecureMesh Extender Assuming the Extender is properly pre-provisioned, use of automatic provisioning as described in the “Trilliant Network Element Management System (NEMS) Administration Guide” (Trilliant document number TLT-CS- ADM-94) recommended. Monitoring the Power-On Sequence... -
Page 19: Appendix
• A cold-water pipe. Make sure it is well connected to earth. Trilliant Incorporated page 19 of 21... - Page 20 Run the CAT5e cable inside the tower structure, tying the cable to the tower leg at every 4 feet of length. For increased protection, run the CAT5e cable through metallic conduit installed on the tower. Trilliant Incorporated page 20 of 21...
-
Page 21: Fcc Statement (Us)
SkyPilot logo are trademarks of Trilliant Incorporated and/or its subsidiaries. All other trademarks are the property of their respective owners. This material is provided for informational purposes only; Trilliant assumes no liability related to its use and expressly disclaims any implied Trilliant Incorporated warranties of merchantability or fitness for any particular purpose.
Need help?
Do you have a question about the SecureMesh XTEN-1000 and is the answer not in the manual?
Questions and answers