Grizzly G9921 Instruction Sheet page 11

DETAIL SANDER OPERATION
Set the direction switch, located just above
the trigger, so that it is in the center locked
position. Install the detail sanding head
onto the motor body. Install the desired
sandpaper grit onto the triangular sanding
pad. Consult the Grizzly catalog or website
for ordering information for sandpaper. The
sandpaper attaches by means of a hook
and loop material. Be certain the replace-
ment sandpaper purchased is of this type.
The oscillating motion of the triangular
sanding pad provides fast cutting action for
detail and intricate sanding. The detail
sander is excellent for hard-to-reach
places like the corners of a picture frame.
Both wood and metal materials can be
sanded with this device as long as the
appropriate types of sandpaper are
installed. Always be sure to check the
sandpaper for loading and sharpness of
grit. Change the sandpaper when the
paper loses its surface, or when the edges
become torn or loose.
Operating this equipment has the
potential to propel debris into the air
which can cause eye injury. Always
wear safety glasses or goggles when
operating equipment. Be certain the
safety glasses you wear meet the
appropriate standards
American National
Institute (ANSI).
-11
-
of the
Standards
Fig 7. Attaching Sandpaper.
G9921 18V Cordless Set