Table of Contents
Advertisement
HDMI Port
The HDMI port supports HDCP 2.2 and Dolby TrueHD and DTS HD Master Audio
formats. It also supports up to 192KHz/16bit 8-channel LPCM audio output. You
can use this port to connect your HDMI-supported monitor. The maximum supported resolution is
4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system.)
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Connection/
Connection/Speed LED:
Speed LED
Activity LED
State
Orange
Green
Off
LAN Port
Line In/Rear Speaker Out (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green)
The line out jack. Use this audio jack for a headphone or 2-channel speaker.
Mic In/Center/Subwoofer Speaker Out (Pink)
The Mic in jack.
Audio Jack Configurations:
Jack
Line In/Rear Speaker Out
Line Out/Front Speaker Out
Mic In/Center/Subwoofer
Speaker Out
Front Panel Line Out/Side
Speaker Out
To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the
multi-channel audio feature through the audio driver.
Please visit GIGABYTE's website for details on configuring the audio software.
Activity LED:
Description
State
1 Gbps data rate
Blinking
100 Mbps data rate
Off
10 Mbps data rate
Headphone/
4-channel
2-channel
a
a
a
- 11 -
Description
Data transmission or receiving is occurring
No data transmission or receiving is occurring
5.1-channel
7.1-channel
a
a
a
a
a
a
a
Advertisement
Table of Contents
