Trip/Fuel Menu Items - Chevrolet 2011 Impala Owner's Manual

Chevrolet 2011 impala automobile owner's manual
Hide thumbs Also See for 2011 Impala:
Table of Contents

Advertisement

(Trip/Fuel): Press this
button to display the odometer,
trip odometers, fuel range, average
economy, instantaneous economy,
Active Fuel Management
on vehicles with this feature, and
average speed.
(Vehicle Information): Press
this button to display the oil life,
units, tire pressure readings,
and compass zone and compass
calibration on vehicles with this
feature.
(Customization): Press
this button to customize the
feature settings on your vehicle.
See
for more information.
(Set/Reset): Press this button to
set or reset certain functions and to
turn off or acknowledge messages
on the DIC.

Trip/Fuel Menu Items

(Trip/Fuel): Press this button
to scroll through the following menu
items:
indicator
Odometer
Press the trip/fuel button until
ODOMETER displays. This display
shows the distance the vehicle has
been driven in either miles (mi) or
kilometers (km).
Trip A and Trip B
Press the trip/fuel button until
TRIP A or TRIP B displays.
This display shows the current
distance traveled in either miles (mi)
or kilometers (km) since the last
reset for each trip odometer.
Both trip odometers can be
used at the same time.
Each trip odometer can be reset
to zero separately by pressing the
set/reset button while the desired
trip odometer is displayed.
Instruments and Controls
The trip odometer has a feature
called the retro-active reset. This
can be used to set the trip odometer
to the number of miles (kilometers)
driven since the ignition was last
turned on. This can be used if the
trip odometer is not reset at the
beginning of the trip.
To use the retro-active reset feature,
press and hold the set/reset button
for at least four seconds. The trip
odometer will display the number
of miles (mi) or kilometers (km)
driven since the ignition was last
turned on and the vehicle was
moving. Once the vehicle begins
moving, the trip odometer will
accumulate mileage. For example,
if the vehicle was driven 8 km
(5 miles) before it is started again,
and then the retro-active reset
feature is activated, the display
will show 8 km (5 miles). As the
vehicle begins moving, the display
will then increase to 8.2 km
(5.1 miles), 8.4 km (5.2 miles), etc.
5-27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents