Table of Contents
Advertisement
en Troubleshooting
Fault
flashes.
flashes.
lights up.
flashes.
All other error codes.
Malfunctions
Fault
The appliance is not work-
ing.
The programme does not
start.
48
Cause
The filters in the water inflow
are blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
The automatic voltage con-
trol system detects an unau-
thorised voltage under-us-
age.
Voltage under-usage causes
a programme extension.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed inicio
pausa + carga.
troubleshooting
"Clean the filters in the water in-
▶
flow" → Page 44.
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
No remedial action possible.
▶
Note: If the power supply is stable, the
programme continues to run as nor-
mal.
No remedial action possible.
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 37
Start the
programme.
▶
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press inicio pausa + carga to start
4.
the programme.
Close the door.
1.
Press inicio pausa + carga to start
2.
the programme.
Call the after-sales service.
▶
→ "Customer Service", Page 56
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Press inicio pausa + carga.
▶
Advertisement
Table of Contents
