ViewSonic ColorPro VP3256-4K User Manual page 45

Menu Option
OSD Pivot
Power Indicator
Auto Power Off
Sleep
ECO Mode
DisplayPort 1.2
DDC/CI
Save As
All Recall
Description
Set the OSD Menu orientation.
• Auto: With the built-in G sensor, the OSD Menu can
automatically pivot when the monitor is positioned
vertically.
• 0°: Sets the OSD Menu without a pivot.
• +90°: Sets the OSD Menu with a +90° pivot.
• -90°: Sets the OSD Menu with a -90° pivot.
• 180°: Sets the OSD Menu with a 180° pivot.
Set the Power Indicator On or Off. If the setting is set to On,
the power indicator lights blue when the device is turned
on.
Enable this option to allow the monitor to automatically
turn off after a certain amount of time.
Set the amount of idle time before the monitor enters Sleep
mode.
Choose between various modes, based on power
consumption.
Enable DisplayPort 1.2 support.
Enable this option to allow the monitor control via the
graphics card.
Set the personalized OSD configurations for User 1/User 2/
User 3. For more information, refer to "Hot Keys" on page
26.
Resets all settings to their default values.
45