Dell C-UBG-DEL4 Installation Manual page 3

3) if one wants to cease CW mode, please press " STOP"
2. Modulated signal:
1) press "Random Data" to have modulated signal;
then press " 2402 MHz" or "2441 MHz" or " 2481 MHz"
to choose lowest, middle and highest frequencies;
for other frequencies, please press "channel –" or "channel +" to select channel.
2) press " PA Bias – " once to select output power
PS: don't press more than once otherwise the power won't be correct.
The proper way to make sure that the power setting is right:
Press " PA Bias + " first to let it max. power and then press " PA Bias – " to enter the correct
setting
3) if one wants to cease modulated mode, please press " STOP"
3. receiving mode:
Just press " Receive Mode " to enter receiving mode.