Advertisement
PLEASE READ INSTRUCTIONS !
DROP Top Fill Cool Mist Humidifier
with Sound Machine
For all models of EE-5306 series
If you have any questions about the operation of your
humidifier, please contact Crane Customer Care.
Toll Free: 888-599-0992
Email:
customer-service@crane-usa.com
PLEASE READ AND SAVE ALL INSTRUCTIONS TO ENSURE
THE SAFE AND EFFECTIVE USE OF THIS HUMIDIFIER.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Crane EE-5306CW
Summary of Contents for Crane EE-5306CW
- Page 1 DROP Top Fill Cool Mist Humidifier with Sound Machine For all models of EE-5306 series If you have any questions about the operation of your humidifier, please contact Crane Customer Care. Toll Free: 888-599-0992 Email: customer-service@crane-usa.com PLEASE READ AND SAVE ALL INSTRUCTIONS TO ENSURE...
-
Page 3: Table Of Contents
The Crane manual you are holding is from recycled materials with no added finishes or harmful dyes. If the humidifier should no longer operate, please be sure to dispose of the unit in an environmentally friendly way by taking it to a public collection point. -
Page 4: Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING! READ AND SAVE THESE INSTRUCTIONS. Failure to follow all of the instructions listed below may result in electric shock, fire and/or serious personal injury. 1. It is advisable to carry filled Water Tank with two hands. 2. - Page 5 AC ADAPTOR The AC/DC Adaptor included with the Crane Drop Cool Mist Humidifier with Sound Machine is 100-240V 50/60 Hz and can be used worldwide. However, in some countries you may need to use an outlet adaptor.
-
Page 6: List Of Main Parts
6. Nightlight Color Changing Control (optional) 7. Sound Machine Control (optional) 8. Plug Port *Crane Vapor Pads available on the Crane website. Fig. 2 ( Water Tank) 9. Mist Channel Cover (removable for easy cleaning) 10. Silicone Tank Valve (Inside tank) 11. -
Page 7: Technical Specifications, Assembly & Use
TECHNICAL SPECIFICATIONS Adaptor Voltage Rating Input : 120V -240VAC, Output: 24VDC 1.0A Humidifier Voltage Rating 24 VDC, 1.0A Frequency 60Hz Water Tank Capacity Approx. 1 Gallon / 3.78 Liter Run Time Per Tank Up to 24 hours Humidifying Capacity Up to 250 sq. ft. / 23m2 Noise Level <... - Page 8 (see Troubleshooting). WATER TANK (Page 4, Fig 2)- Place water tank onto the humidifier base ensuring the Crane Logo lines up with the Power Button for proper water tank placement. Fill water into the Water Fill Opening on the top of the water tank.
-
Page 9: Sound Machine, Nightlight Function, Aroma Tray
AROMA TRAY: Remove the water tank. Place the Crane Vapor Pad (HS-1950/L) into the aroma tray or add essential oils to an unscented pad (3 unscented pads included) and the place into the aroma tray as desired. Replace the water tank before running the humidifier. -
Page 10: Maintenance, Cleaning & Storing Your Humidifier
MAINTENANCE & CLEANING Cleaning and disinfecting on a regular basis is very important for maintaining the performance of your humidifier. NEVER IMMERSE HUMIDIFIER BASE IN WATER. IMPORTANT: Water left in the tank or humidifier base when not in use may result in buildup of mineral deposits and bacteria which may inhibit the output efficiency as well as void the warranty. -
Page 11: Customer Care & Trouble Shooting
4. Store humidifier in a cool, dry place TROUBLESHOOTING DO NOT attempt to repair the motor yourself. If the humidifier continues to not operate, please contact Crane Customer Care. Problem Solution Clean the Water Level Sensor Float: Pull the float from the base ... -
Page 12: Warranty
L I M I T E D W A R R A N T Y Thank you for purchasing a Crane product which has been tested to meet our stringent quality standards. This product is warrantied to be free from manufacturing defects under normal use and conditions for 1 year. - Page 13 SAVE YOUR DATED PROOF OF PURCHASE! [ You will need this in case of warranty ] staple tape or paperclip your receipt HERE...
Need help?
Do you have a question about the EE-5306CW and is the answer not in the manual?
Questions and answers
I accidently immersed the base in water. What are my options?