Advertisement
4
4
Freezer
Shelf
Front Panel
• Slide the freezer shelf into the grooves in the side
panel with the molded puppy and the front panel.
5
5
Back Panel
Side Panel
• Position the back panel with the molded detail
upright. Make sure the refrigerator coils are over
the refrigerator openings.
• Fit the back panel onto the side panels.
Groove
Side Panel
with Molded
Puppy
Refrigerator
Side Panel
Refrigerator Opening
Assembly
6
6
Groove
Side Panel
• Insert eight screws through the back panel and into
the side panels. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
7
7
Coils
Base
• Position the assembly over the base, as shown.
• Insert and "snap" the tabs on the bottom of the
assembly into the slots in the base.
4
Back Panel
Advertisement
