OPTRON Bassbuds Wave User Manual

Bassbuds Wave TWS Earbuds - User Manual
Important: pTron Bassbuds Wave is set at 60% default volume, and the earbuds does not support volume adjustment.
Please control the volume through the phone.
Smart Power On & Pairing
1. Open the charging case and take out both the earbuds together. Earbuds will power on automatically.
2. Wait for 2-3 seconds until L & R earbuds pair with each other.
3. Turn on the Bluetooth on your phone & search "pTron TWS" to connect with the device.

Mode Change

Touch TSA on the Right earbud for 2-3 seconds to change the mode - Movie and Music mode.

Smart Power Off

Touch TSA on both the earbuds for 5 seconds Or Keep both the earbuds into the charging case and close the charging
case cap.
Note: TSA stands for Touch Sensitive Area

Connectivity Bluetooth - Automatic

Just turn ON the Bluetooth earbuds. They will automatically connect to the last connected device (Instant wake & pair
technology).
Note: The last connected device must be in 10 meters wireless range and Bluetooth function must be On.
Calling or Music through Mono & Dual Buds
Mono Bud Use - Just place the right or left earbud back into the charging case and close the charging case cap.
Dual Buds Use - Use left & right earbuds together.

Voice Assistant Activation

Touch TSA on the Left earbud for 2-3 seconds, you will hear a 'didi sound which indicates that the phone's voice
assistant is awake.
Note: TSA stands for Touch Sensitive Area
Touch Sensitive Area
(TSA)