Download Print this page

Babyhug BGBW008 User Manual

Honey bee musical baby walker

Advertisement

Quick Links

baby walker
Warning
1)
Inspection and adjustment must be done before using the walker.
2)
The height of the cushion should be properly adjusted to avoid the babies falling out.
3)
Make sure all the locking devices are in the locked state before use.
4)
Avoid using baby walker on or near threshold, stairs or irregular places; it may result in serious injury.
5)
Do not use baby walker on a slope driveway or street.
6)
Do not allow other child to push the baby walker when there is baby in it.
7)
Do not use the baby walker when the baby can walk independently.
8)
Never leave your baby unattended when in use.
Maintenance
1)
To avoid accidental injury, inspect the baby walker on regular basis.
2)
Please check all the parts for any damage or rupture and change them if required before using the walker.
3)
Seat cloth is hand washable. Babyhug laundry detergent is recommended.
4)
This walker contains small part for assembly purpose, please store them carefully and keep away from baby.
5)
Do not use or store the baby walker at irregular, damp, cold or high-temperature places for a long time.
AGE GROUP
6 MONTHS +
Honey Bee Musical Baby Walker
Stepping with Joy
STYLE CODE : BGBW008
baby walker
Parental bar
Stopper
4 Levels of height adjustment
Carrying Capacity
UP TO 15 Kgs

Advertisement

loading
Need help?

Need help?

Do you have a question about the BGBW008 and is the answer not in the manual?

Questions and answers

Summary of Contents for Babyhug BGBW008

  • Page 1 Please check all the parts for any damage or rupture and change them if required before using the walker. Seat cloth is hand washable. Babyhug laundry detergent is recommended. This walker contains small part for assembly purpose, please store them carefully and keep away from baby.
  • Page 2 Adjust the Height Install Stopper As shown in picture, fix the base then press down As shown in picture, insert the stopper into the Know Your Product Well or pull up the panel to the needed height, make plastic holes in chassis and tighten it with 4 pieces sure the safety device is in the locked state.