Aqua Lung 769161 User Manual
  1. Manuals
  2. Brands
  3. Aqua Lung Manuals
  4. Safety Equipment
  5. 769161
  6. User manual
Aqua Lung 769161 User Manual

Aqua Lung 769161 User Manual

Surface supplied harness
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SURFACE SUPPLIED
HARNESS
USER'S MANUAL
REV 4/10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 769161 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aqua Lung 769161

Summary of Contents for Aqua Lung 769161

  • Page 1 SURFACE SUPPLIED HARNESS USER’S MANUAL REV 4/10...
  • Page 2 Aqua Lung America, inc. ©2010 AquA LuNg AmeriCA.

  • Page 3: Table Of Contents

    CoNteNtS FeAtureS ....................4 DoNNiNg AND ADJuStmeNt proCeDureS ........5 ADJuStiNg tANK BAND AND CyLiNDer Keeper ........ 5 SeCuriNg CyLiNDer to hArNeSS ............6 threADiNg the CAm BuCKLe ............... 7 iNStALLiNg DouBLe ACtioN Weight reLeASe SheAth ....8 remoViNg DouBLe ACtioN Weight reLeASe SheAth ....9 LoADiNg Weight iNto SureLoCK™...

  • Page 4: Features

    Surface Supplied Harness User’s Manual FEAtURES  T heSurfaceSuppliedHarness(SSH)isaharnesssystemspecificallydesignedforcommercialandmilitarydiving purposes, providing a working harness for any tended surface or saturation diving application. •SingleandtwopointextractionD-rings(g). •Theharnessisadjustabletofitalargespectrumof body shapes and sizes. •Dualadjustabletankbands(h). • Size #1 waist 30-38 inches (76-97 cm) •Adjustablecylinderkeeper(i). • Size #2 waist 38-46 inches (97-117 cm) •up to 10 lb non-ditchable weight may be carried underthecomfortpad(j).

  • Page 5: Donning And Adjustment Procedures

    SSH Donning and Adjustment Procedures Don the SSh. Threadthewaistbandwebbingthroughthebuckleandpullthewebbinguntilasnugfitisachieved,repeat the same process for the chest strap. Releasethehookandloopretainerononeofthetorsoadjustmentstraps (e). pull the webbing in a vertical motionuntilasnugfitisachievedthroughthetorso,re-fastenthehookandloopretainer.Repeatthesame processontheothertorsoadjustmentstrap. Bring the two clips (f) of the crotch strap between your legs and fasten them to the lower metal D-rings on the front of the harness.

  • Page 6: Securing Cylinder To Harness

    Surface Supplied Harness User’s Manual Securing Cylinder to Harness 1. Wet the cylinder bands and then slide them over the cylinder so that the harness is at the desired position in relation to the cyl- inder valve. make sure the cylinder valve air outlet is facing toward the diver’s back.

  • Page 7: Threading The Cam Buckle

    threading the Cam Buckle note: Harness cylinder bands adjust for all standard cylinder top View diameters: 6.9” (17.5 cm), 7.25” (18.5 cm), and 8.0” (20.3 cm). The cylinder bands are properly threaded to the buckles when the harness leaves the factory. If rethreading is necessary, follow the procedure in this section.

  • Page 8: Installing Double Action Weight Release Sheath

    Surface Supplied Harness User’s Manual Installing Double Action Weight Release Sheath 1.RemovetheSureLock™weightpouchfromthesheath.InsertMaliceclip®throughallfiveMOLLEloopson the weigh sheath, “tAB” side of malice clip® facing out (See Figs. 15 & 16). tab side facing out Fig. 15 Fig. 16 2. Weave the malice clip® under the moLLe/malice loops (Loops are counted from the top to the bottom) in the following order to secure the weight sheath to the harness (See Fig.

  • Page 9: Removing Double Action Weight Release Sheath

    3. When the malice clip® has been woven completely through both moLLe and malice loops as directed, secure the open end of the malice clip® into the tab slot. hold the tab, then pull on the inserted end to ensure the clip has been completely inserted and locked down (See Figs.

  • Page 10: Loading Weight Into Surelock™ Pouch

    Surface Supplied Harness User’s Manual Loading Weight into SureLock™ Pouch 1. Load each weight pouch with equal amounts of weight for optimum balance, preventing the ten- dency to roll to one side during the dive. Also, it is strongly recommended that each weight pouch isfullyloadedwithfourseparateblocks.Forex- ample, if you want to load the weight pouch with 12 pounds, use four separate 3 pound blocks.

  • Page 11: Ssh Pre-Dive Checklist

    SSH Pre-Dive Checklist Diver Name_____________________________ Date_____________ SSH Number_________ WARNING: Before each use, the SSH must be given a thorough visual inspection and functional test. NEVER dive with a harness that shows signs of damage until it has been repaired and reinspected. Initials ______ 1.

  • Page 12: Manufacturer's Recommended Maintenance Checks

    Surface Supplied Harness User’s Manual Manufacturer’s Recommended Maintenance Checks Annual inspection- inspect SSh for wear or damage. • inspect buckles and slides. • inspect stitching components, webbing and hook/loop material. • inspect SureLock™ weight pouch locking mechanism. pre-Dive repeat annual inspection. post-Dive rinse and dry.

  • Page 13: Annual Inspection & Service Record

    Annual Inspection & Service Record Date SSh # technician Name observations technician Signature...

  • Page 14: Maintenance Notes

    Surface Supplied Harness User’s Manual Maintenance Notes...

  • Page 15: Warranty Information

    Aqua Lung® one year Limited Warranty™ Aqua Lung America, inc. warrants to the original purchaser for a period of one year from the purchase date that the product will be free from defects in material and workmanship; provided thatitreceivesnormaluse,propercareandprescribedmaintenancesubjecttothoserestric- tionsstatedbelow.Thislimitedwarrantyisextendedonlytotheoriginalpurchaserforpurchases...
  • Page 16 Surface Supplied Harness 2340CousteauCourt•Vista,CA92081 Phone(760)597-5000•Fax(760)597-4900 www.aqualung.com/militaryandprofessional ©2010 Aqua Lung International Literature PN 769181 REV 04/10...

This manual is also suitable for:

769169

Table of Contents