Connecting to a PICTBRIDGE
™
PICTBRIDGE
technology allows printing
of the photos saved on a memory card by a
printer.
To find out if a printer is PICTBRIDGE
compatible, simply look for the PICTBRIDGE
logo on the packaging or check the owner's
manual for specifications. With the
™
PICTBRIDGE
function on your camera, you
can print the captured photos directly to a
™
PICTBRIDGE
compatible printer using the
supplied Micro USB cable, without the need
for a PC.
Setting the USB Mode
The camera's USB port can be set to connect
with either a PC or a printer. The following
steps will ensure that the camera is correctly
configured to connect with a printer.
1. Press the
button, press the up/down
button to select
button to enter the menu.
2. Press up/down button to select
press the
button or right button to
enter the menu.
™
™
and press the
and
Compatible Printer
3. Press the up/down button to select
[USB] and press the
button to enter the menu.
4. Press the up/down button to select
™
[Printer] and press the
confirm.
After the camera is reset, it will
switch to PC mode automatically
from USB mode.
See "Using the PICTBRIDGE
section on page 73.
button or right
button to
™
Menu"
71 71