Seypos TM Series User Manual

Touch screen monitor

Advertisement

Quick Links

User's Manual
Touch Screen Monitor
Model: TM-15"/17"/19"/22"W
Version 2.0 2010.10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TM Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Seypos TM Series

  • Page 1 User’s Manual Touch Screen Monitor Model: TM-15"/17"/19"/22"W Version 2.0 2010.10...
  • Page 2 Seypos reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Seypos to notify any person of such revisions or changes.
  • Page 3 Warnings and Cautions Warning • Danger — Explosion hazard. Do not use in the presence of flammable anesthetics. • To prevent fire or shock hazards, do not immerse the unit in water or expose it to rain or moisture. • Do not use the unit with an extension cord receptacle or other outlets unless the prongs of the power cord can be fully inserted.
  • Page 4 Critical functions are: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
  • Page 5: Table Of Contents

    Table of Contents INTRODUCTION ......................7 Product Description ....................... 7 LCD Monitor Performance Features ................7 TFT LCD Monitor Panel................... 7 External Medical Grade Power Adaptor..............7 INSTALLATION AND SETUP ................... 8 Unpacking Your Touchmonitor..................8 Product Overview ......................
  • Page 6: Introduction

    NTRODUCTION Product Description The T06 series touch screen monitors which use liquid crystal monitor (LCD) technology, designed to present information to the operator, care-giver and the patient. The T06 series features both serial and USB touch interfaces as standard configuration. The T06 series functionally consists of 15/17/17/22 inch LCD main monitor with a touch screen.
  • Page 7 19 inch TFT LCD Monitor Panel Monitor format 1280x1024 Monitor area 376 mm (H) x 301 mm (V) Pixel pitch 0.294 mm (H) x 0.294 mm (V Contrast ratio 1000:1 typical Brightness LCD 250 cd/m2 (Typical) Response time 5msec typical Monitor color 16.7 million colors, 6 Bit with dithering Typical vertical viewing angle:...
  • Page 8: Installation And Setup

    CHAPTER NSTALLATION AND ETUP This chapter discusses how to install your LCD touchmonitor and how to install touch screen driver software. Unpacking Your Touchmonitor Check that the following items are present and in good condition:...
  • Page 9: Product Overview

    Product Overview Front View TM-515 TM-517 TM-519 TM-522...
  • Page 10: Rear View

    Rear View Side View...
  • Page 11: Kensingtontm Lock

    Kensington™ Lock The Kensington™ lock is a security device that prevents theft. To find out more about this security device, go to http://www.kensington.com. USB Interface Connection Your touchmonitor comes with one USB cable. (For use with Windows 2000, ME, and XP, 7 systems only.) To set up the monitor, please refer to the following figures and procedures: Install the Stand Base...
  • Page 12 OTE Before connecting the cables to the touchmonitor, route all the cables that you will be using through the hole in the base as shown in the picture above. Only use one of the following: Serial or USB touch cable and VGA video cable. The following illustrations guide you step by step in connecting your touchmonitor using a Serial or USB cable connection with VGA video cable..
  • Page 13: Optimizing The Lcd Monitor

    Connect Cables After you have attached all the cables to the monitor; gently bring all the cables toward the center so they fit under the cable cover lip. Snap the cable cover in place over the connections. Optimizing the LCD Monitor To ensure the LCD monitor works well with your computer, configure the monitor mode of your graphic card to make it less than or equal to default resolution, and make sure the timing of the monitor mode is compatible with the LCD monitor.
  • Page 14: Installing The Touch Driver Software

    Installing the Touch Driver Software Driver software that allows your touchmonitor to work with your computer comes with the TouchSystems monitor. Drivers are located on the enclosed TouchTools CD-ROM for the following operating systems: • Windows XP • Windows 2000 •...
  • Page 15 If Windows 7, XP, Windows 2000, Windows 98, or Windows Me does not start the Add New Hardware Wizard: NOTE: For Windows 7 and Windows XP/2000, you must have administrator access rights to install the driver. 1. If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program.
  • Page 16: Operation

    CHAPTER PERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 1024x768 for T06-15, 1280x1024 for T06-17/19, 1680x1050 for T06-22W at 60-75 Hz.
  • Page 17: Controls And Adjustment

    Table 1 - User controls Control Function Menu monitor and menu exit Adjusts the increasing value of the selected OSD control option. Adjusts the decreasing value of the selected OSD control option AUTO Auto-Adjust POWER Auto-Adjust Controls and Adjustment OSD Menu Functions To monitor the OSD Menu, press the button.
  • Page 18: Power Led Monitor & Power Saving

    Sharpness • Adjust image sharpness. Phase • Adjusts the phase of the dot clock. Adjust for best image. Clock • Adjusts the ratio of dividing frequency of the dot clock. Adjust to remove vertical dark bands in image. OSD Left/Right •...
  • Page 19: Monitor Angle (Desktop Only)

    Monitor Angle (desktop only) For viewing clarity, you can tilt the LCD forward or back for the best viewing angle and minimum glare. CAUTION · In order to protect the LCD, be sure to hold the base when adjusting the LCD. ·...
  • Page 20: Troubleshooting

    CHAPTER ROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Solutions to Common Problems Problem Suggestion(s) • Check that the monitor’s Power Switch is on. The monitor does not respond •...
  • Page 21: Native Resolution

    APPENDIX ATIVE ESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the TouchSystems LCD touchmonitor, the native resolution is 1024 x 768 for the 15.0 inch size, 1280x1024 for the 17/19 inch size, and 1680x1050 for the 22 inch size.
  • Page 22: Touchmonitor Safety

    APPENDIX TOUCHMONITOR SAFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation). 1.
  • Page 24 APPENDIX ECHNICAL PECIFICATION TM-515 Touch Monitor Specification Model TM-515 Form factor Desktop Enclosure color Black Diagonal size 15.0" Aspect ratio Horizontal: 12.0" (304 mm) Useful screen area Vertical: 9.0" (228 mm) Width: 13.8" (350 mm) Height: 12.2" (310 mm) Depth: 6.9" (175 Monitor dimensions (with...
  • Page 25 Power consumption (typical) 30 W 3-Tracks Magnetic Stripe Reader, USB interface VFD Customer Display, 2 lines with 20 characters per line, Serial Options interface Wall mount or celling mount brackets Operating: 0°C to 40°C (32°F to 104°F) Temperature Storage: -20°C to 60°C (-4°F to 140°F) Operating: 20%-80% Humidity(noncondensing) Storage: 10%-90%...
  • Page 26 Colors 16.7 million Brightness(typical) LCD panel: 250 nits ResistiveTouch: 200 nits Response time - total (typical) 5 msec Viewing angle (typical) Horizontal: ±80° or 160° total Contrast ratio (typical) 1000:1 Input video format Analog VGA Input video signal connector D-Sub 15-Pin VGA type Input frequency Horizontal: 31.5-60.2 kHz Vertical: 56.3-75 Hz...
  • Page 27 TM-519 Touch Monitor Specification Model TM-519 Form factor Desktop Enclosure color Black Diagonal size 19.0" Aspect ratio 4:03 Useful screen area Horizontal: 12.0" (304 mm) Vertical: 9.0" (228 mm) Monitor dimensions (with Width: 13.8" (350 mm) Height: 12.2" (310 mm) Depth: 6.9" (175 stand) Dimensions vary with stand position and options selected Native (optimal) resolution...
  • Page 28 Shipping box dimensions(W x D 16.54" (420 mm) x 14.96" (380 mm) x 10.24" (260 mm) x H) Optional product coverage Advance Unit Replacement program (North America only) Backlight lamp life Typical 30,000 hours to half brightness MTBF 50,000 hours demonstrated On-screen display (OSD) Controls (side): menu, up, down, select, power Settings: contrast, brightness, H/V position, RGB (color temp),...
  • Page 29 DC: +12VDC ±5% Input connector AC: IEC 60320 C6 DC: Coaxial power jack (2 mm pin diameter, 6.4 mm barrel diameter, 8.8 mm barrel length) Power consumption (typical) 45 W Options 3-Tracks Magnetic Stripe Reader, USB interface VFD Customer Display, 2 lines with 20 characters per line, Serial interface Wall mount or celling mount brackets Temperature...
  • Page 30: Replacement Parts

    APPENDIX REPLACEMENT PARTS Replacement Parts Item Part Number Power Adapter PW-0100001 Power Cord PW-0100002 VGA Cable CB-10100001 Serial Cable CB-10100002 USB Cable CB-10100003 Audio Cable CB-10100004 AD Board PCB-10100001 Inverter PCB-10100002 Touch Controller PCB-10100003 Touch Panel TP-10100001 LCD Panel LCD-10100001...
  • Page 31: Warranty

    WARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the LCD panel and touch panel is 1 year, for components of the product is 2 years.
  • Page 32 Buyer’s use of the Products with applicable laws, regulations, codes, and standards. Buyer retains and accepts full responsibility for all warranty and other claims relating to or arising from Buyer’s products, which include or incorporate Products or components manufactured or supplied by Seller. Buyer is solely responsible for any and all representations and warranties regarding the Products made or authorized by Buyer.

This manual is also suitable for:

Tm-517Tm-519Tm-515Tm-522

Table of Contents