Alpha Networks Extreme WUS-ND12A Quick Install Manual

802.11a/b/g/n usb module

Advertisement

Quick Links

Quick Install Guide
802.11a/b/g/n USB module
Thank you for purchasing the Xtreme N® Dual Band USB Adapter. Follow the
easy steps in this guide to properly set up your adapter. Please verify that all the
package contents listed below are available.

Package Contents

WUS-ND12A 802.11a/b/g/n USB module
CD with drivers and software
If any of the above items are missing, please contact your reseller.

System Requirements

• A desktop computer with an available USB slot
• Windows® 7, Windows Vista® (32/64-bit), XP (32/64-bit with Service Pack 2 or
higher)
• 300MHz processor and at least 64MB of RAM
• An 802.11n, 802.11g or 802.11a access point or wireless router
DWA-160
What This Product Does
The WUS-ND12A is an 802.11a/b/g/n USB module that delivers unrivaled
performance for your laptop or desktop computer. Once connected, access your
network's high-speed Internet connection while sharing photos, files, music,
video, printers, and storage.

Before You Begin

Before installing your new wireless module, please verify the following:
• Remove any previous installations of wireless adapters.
• Disable any built-in wireless adapters.
• Verify the settings such as the wireless network name (SSID) and security
settings of the network(s) you want to connect to.
Note: If you've installed a different manufacturer's adapter or a different model
module, make sure the software is uninstalled before installing the new
software. Some utilities may cause a conflict with the new software. Windows
Windows Vista
and XP users may use the built-in wireless utility.
®

Installation

Note: Do NOT plug the adapter into your computer before installing the
drivers.
Insert the WUS-ND12A Driver CD into the CD-ROM drive. When the autorun screen
appears, click Install and follow the on-screen instructions to install the wireless
adapter drivers and software.
If the CD Autorun function does not automatically start on your computer, go to
Start > Run. In the run box type "D:\autorun.exe" (where D: represents the drive
letter of your CD-ROM drive) and click OK.
7,
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Extreme WUS-ND12A and is the answer not in the manual?

Questions and answers

Summary of Contents for Alpha Networks Extreme WUS-ND12A

  • Page 1 Quick Install Guide What This Product Does The WUS-ND12A is an 802.11a/b/g/n USB module that delivers unrivaled performance for your laptop or desktop computer. Once connected, access your 802.11a/b/g/n USB module network’s high-speed Internet connection while sharing photos, files, music, video, printers, and storage. Before You Begin Before installing your new wireless module, please verify the following: • Remove any previous installations of wireless adapters.
  • Page 2 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3 This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna.
  • Page 4 Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à...
  • Page 5 This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna.
  • Page 6 IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
  • Page 7 Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué...

Table of Contents