en Cleaning and servicing
7.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
▶
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
Firmly press on the sealing cap.
8.
Insert the drain hose into the
9.
holder.
32
Cleaning the drain pump
Requirement: The drain pump is
empty. → Page 31
Since water may remain in the
1.
drain pump, unscrew the pump
cap carefully.
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
Insert the pump cap.
3.
Screw the pump cap as far as it
4.
will go.
90°
The handle on the pump cap must
be in a vertical position.