Advertisement

Quick Links

ENGLISH
Important safety instructions! Please read before connection!
DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device.
Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective
devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact your
dealer. In the case of a malfunction of the device, operation must also be stopped
immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged, it
must be replaced immediately with an original spare part from the manufacturer.
Always make sure that the grounding of the device is maintained. Only use the supplied
power cables and always maintain the earthed protective contacts on the side. Make sure
that the sockets used have a properly functioning protective earth.
Failure to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out
of the reach of babies and children due to the risk of suffocation.
Ensure that children never use the appliance unattended! In addition, make sure that
children do not remove (small) parts from the device, as they could suffocate by swallowing
parts!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a well-ventilated location away from direct heat sources,
naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.
Hint! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor operation (IP20).
Never expose the unit to rain, moisture or liquids as this may cause damage.
Vibrations, dust or sunlight can also cause damage, avoid them!

Advertisement

Table of Contents
loading

Summary of Contents for Fame Audio Phantom Power PP-1

  • Page 1 ENGLISH Important safety instructions! Please read before connection! DANGER! (Electrical shock due to high voltages in the device) The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage. Before each use, check the device for damage or the absence of components, protective devices or housing parts.
  • Page 2 ENGLISH Hint! (Condensation) To avoid condensation in the unit, the unit should adapt to the ambient temperature before commissioning. Hint! (Unwanted odours) A new product can sometimes lead to unwanted odours. This reaction is normal and disappears after a few minutes. Hint! Hints for switching on/off: Do not turn phantom power on until you have properly connected a condenser microphone.
  • Page 3 ENGLISH Symbols on device and packaging: The lightning flash symbol warns the user of uninsulated voltages and the risk of electric shock The exclamation mark symbol draws the user’s attention to important maintains and operating instructions in the manual The lightning warns you of dangerous voltage accessible from the outside. A connection to any terminal marked with this symbol may only be made with a ready-made cable that complies with the manufacturer's recommendations or with cables installed by qualified personnel...
  • Page 4: Intended Use

    ENGLISH Congratulations on your new FAME Audio PP-1! Thank you for choosing a FAME Audio PP-1 product. Through efficient development and economical production, FAME Audio enables high quality products at a fantastic price. Please read the instruction manual carefully to learn about all the features of this product and keep it for future use.
  • Page 5: Installation

    ENGLISH Installation: Be sure to check the unit for damage before use. Use the original packaging or a suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use. Set up: All connections of the device should be made before switching on. Only use high-quality, undamaged and as short cables as possible for the connections.
  • Page 6: Connections And Controls

    ENGLISH Connections and controls: Designation LED-Operating Display On- Off Switch Connection Power supply XLR-Output (male), 3-pole XLR-Input (female), 3-pole...
  • Page 7: Specifications

    ENGLISH Specifications: Model PP-1 Power supply unit for supplying a condenser Type microphone with a phantom voltage of 48 V On-/Off Switch Case Aluminium Colour Black Power Supply Via 18V power supply unit Connections XLR-In-/Output (3-pole) Dimensions (L x W x H) 100 x 95 x 46 mm Weight 0,300 kg...
  • Page 8: Troubleshooting

    ENGLISH Troubleshooting: The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the corresponding specialist personnel. Symptom Troubleshooting Check the cable for damage (cuts, extreme kinks, etc.) and replace if necessary. Check the wiring.
  • Page 9 ENGLISH Envrionmental protection: The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importance to us. Please dispose of and recycle the packaging components after use properly. Disposal of packaging: Ensure that paper packaging, plastic materials, etc.
  • Page 10 ENGLISH Notes MS ID: REC0014557-000 04/2020...

Table of Contents