Advertisement
grease guards are in line insert unsharpened ends of the blades into the slot in the
front of your electric knife.
This is done with maximum ease and safety by grasping the plastic grease guards
between thumb and forefinger with the serrated edges of the blades down and
away from you.
CAUTION ! Never insert or remove blades while your electric knife is plugged into
electrical outlet.
Push both blades into the slot until both click into place. If one blade clicks in the
locked position before the other, just slide the unseated blade further into your
electric knife by pushing on its grease guard.
Plug cord into any local power source of AC outlet.
• Stop the device and disconnect it from the power supply.
• Wait, before approaching the moving parts during operation, that they are
completely stopped.
• Press the ejection button of the blades and remove them by holding them by the
provided end for this purpose.
CAUTION : Take all necessary precautions as the blades are extremely sharp and
can cause serious injury.
Unroll the power cord completely.
Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
TO REMOVE BLADES
USE
8
Advertisement
