Mounting On A Table - LG 47LP860H Owner's Manual

CAUTION
When attaching the stand to the TV set,
y y
place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
Make sure that the screws are inserted
y y
correctly and fastened securely. If they
are not fastened securely enough, the
TV may tilt forward after being installed.
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
Remove the stand before installing the TV on
y y
a wall mount by performing the stand
attachment in reverse.
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
1 0 c m
Connect the power cord to a wall outlet.
2
CAUTION
Do not place the TV near or on sources
y y
of heat, as this may result in fire or other
damage.
Attaching the TV to a table
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
(Only 37/39/42/47LN54**, 37/39/42LP36**,
37/39/42LP63**)
4-Screws
(not provided as parts of the product)
Stand
Screws: M5 x L (*L: Table depth + 8-10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
13
1 0 c m
Table