How to restore the system to its default settings?
Go to Administration > Restore/Save/Upload Setting, and
•
click Restore.
The following are the factory default settings:
User Name:
Password:
Enable DHCP:
IP address:
Domain Name:
Subnet Mask:
DNS Server 1:
DNS Server 2:
SSID (2.4GHz):
SSID (5GHz):
NOTE: XX refers to the last two digits of 2.4GHz MAC address. You can
find it on the label on the back of your router.
Firmware upgrade failed.
Launch the rescue mode and run the Firmware Restoration utility.
Refer to section 5.2 Firmware Restoration on how to use the
Firmware Restoration utility.
admin
admin
Yes (if WAN cable is plugged in)
192.168.1.1
(Blank)
255.255.255.0
192.168.1.1
(Blank)
ASUS_XX_2G
ASUS_XX_5G
127