Table of Contents
Advertisement
Problem
Self-Cleaning cycle
will not operate
Oven cooking results
not what expected
24-Jan-2018 10:45:49 EST | RELEASED
Possible Causes and/or Solutions
The oven door is open: Close the oven door all the way.
The function has not been entered: See the "Self-Cleaning Cycle" section.
A Timed Self-Clean cycle has been set: See the "Self-Cleaning Cycle" section.
On double oven models, one oven is self-cleaning: When one oven is self-cleaning, the other
oven cannot be set to self-clean.
The set temperature was incorrect: Double-check the recipe in a reliable cookbook.
Oven temperature needs adjustment: See "Temperature Calibration" in the "More Modes" section.
Oven was not preheated: See the "Baking and Roasting" section.
Racks were positioned improperly: See the "Positioning Racks and Bakeware" section.
Not enough air circulation around bakeware: See the "Positioning Racks and Bakeware" section.
Batter distributed unevenly in pan: Check that batter is level in the pan.
Darker browning of food caused by dull or dark bakeware: Lower the oven temperature 25°F (15°C)
or move rack to a higher position in the oven.
Lighter browning of food caused by shiny or light colored bakeware: Move rack to a lower position
in the oven.
Incorrect length of cooking time was used: Adjust cooking time.
Oven door was not closed: Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking: Oven peeking releases oven heat and can result in longer
cooking times.
Rack is too close to bake burner, making baked items too brown on bottom: Move rack to higher
position in the oven.
Pie crusts browning too quickly: Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
15
Advertisement
Table of Contents
