Setting Up The Monitor Set; Attaching The Stand Base; Detaching The Stand Base - LG 22BK55WY Owner's Manual

6
ASSEMBLING AND PREPARING

Setting up the Monitor set

Attaching the Stand Base

1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
CAUTION
To protect the screen from scratches, cover
y
the surface with a soft cloth.
2
Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
3
Using a coin, turn the screw clockwise to se-
cure the stand base.
Stand Base
Stand Body
Stand Base

Detaching the stand base

1
Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a coin, turn the screw in the stand base
counterclockwise. Detach the stand base from
the stand body.
Stand Base
CAUTION
The components appearing in the illustra-
y
tions may look different from the actual prod-
uct.
Do not carry the monitor upside-down as this
y
may cause it to fall off its stand, resulting in
damage or injury.
To avoid damaging the screen when lifting
y
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
Only remove the tape and the locking pin
y
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.
Stand Body