Table of Contents
Advertisement
Available languages
Available languages
3.8 Power Off
Slide the power switch to the OFF position to power off the camera.
Please note that even in the OFF mode, the camera still consumes a
small amount of battery power. Therefore, please remove the batteries
if the camera is not in use for a length of time.
4 Advanced Operations
From the basic operations of the camera previewed in the previous
chapter, we know that the camera has three basic operation modes:
1.
OFF mode: Power switch is in the OFF position.
2.
ON mode: Power switch is in the ON position.
3.
TEST mode: Power switch is in the TEST position.
In the above three modes, the OFF mode is the specified safe mode
when replacing the SD card or batteries and transporting the camera.
This chapter explains the advanced operations for customizing the ca-
mera settings. The settings can only be customized in TEST mode and
the wireless remote is needed.
4.1 Settings Menu
To view the camera settings menu, press MENU in the TEST mode (cal-
led settings menu in this chapter). The settings menu will be shown on
the LCD of camera.
30
Advertisement
Chapters
Table of Contents
