Table of Contents
Advertisement
Write text
Insert special characters and
punctuation marks in Chinese
input mode
1.
First close the Chinese input window, and then
press and hold * to open a list of special characters
and punctuation marks.
2.
Scroll in the relevant direction (up, down, left or
right) to reach and highlight your needed special
character or punctuation mark, and press the scroll
key to enter it.
Traditional text input
Press a number key (1–9) repeatedly until the desired
character appears. There are more characters available
for a number key than are printed on the key.
If the next letter is located on the same key as the
present one, wait until the cursor appears (or scroll
right to end the time-out period), and enter the letter.
To insert a space, press 0. To move the cursor to the
next line, press 0 three times.
54
Predictive text input
With predictive input, you can enter any letter with a
single keypress. Predictive text input is based on a
built-in dictionary to which you can add new words.
1.
To turn predictive text input on or off in the general
settings, press
, and select
General
Personalisation
>
Predictive
text.
2.
To write the desired word, press the keys 2–9. Press
each key only once for one letter. For example, to
write "Nokia" when the English dictionary is
selected, press 6 for N, 6 for o, 5 for k, 4 for i, and
2 for a.
The word suggestion changes after each keypress.
3.
When you finish writing the word correctly, scroll
right to confirm it, or press 0 to add a space.
If the word is not correct, press * repeatedly to view
the matching words the dictionary has found one
by one.
If the ? character is shown after the word, the word
is not in the dictionary. To add a word to the
dictionary, select Spell, enter the word using
traditional text input, and select OK. The word is
Tools
Settings
>
>
Language
>
>
Advertisement
Table of Contents
