Avermedia AveDiGi EB1704HB DVD User Manual
  1. Manuals
  2. Brands
  3. Avermedia Manuals
  4. DVD Player
  5. AveDiGi EB1704HB DVD
  6. User manual
Avermedia AveDiGi EB1704HB DVD User Manual

Avermedia AveDiGi EB1704HB DVD User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AVerDiGi
EB1704HB DVD
EB1504NET DVD
EB1504 NET
User Manual
Sept.2008

Advertisement

Table of Contents
loading

Summary of Contents for Avermedia AveDiGi EB1704HB DVD

  • Page 1 AVerDiGi EB1704HB DVD EB1504NET DVD EB1504 NET User Manual Sept.2008...
  • Page 2 In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.
  • Page 3 WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION NOTICE - INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

  • Page 4: Table Of Contents

    Table of Contents Chapter 1 Introduction ....................1 Package Content ........................1 Features and Specifications ..................... 1 Front Panel ..........................5 1.3.1 EB1704HB DVD & EB1504NET DVD ................. 5 1.3.2 EB1504 NET ........................6 Back Panel ..........................7 Setting Up the DVR Unit ......................8 1.5.1 Installing Hard Disk for EB1704HB DVD/EB1504NET DVD ..........
  • Page 5 To Use iStable ........................42 Chapter 8 Using the Remote Programs ..............43 Familiarizing the Web Viewer Buttons ................... 45 8.1.1 To Setup Remote System Setting ..................47 8.1.1.1 System Setup ........................ 47 8.1.1.2 Camera Setup ........................ 48 8.1.1.3 Record Setup ......................... 50 8.1.1.4 Alarm/Sensor Setup .......................
  • Page 6 10.4.5 Alarm Setting ........................79 10.4.5.1 To setup an alarm condition ..................79 10.4.6 User Setting ........................81 10.4.6.1 To Set the User Setting ..................... 81 10.5 Using the Playback Function ....................82 10.5.1 To Playback the video ....................... 82 10.5.2 Using the Local Playback Application ................

  • Page 7: Chapter 1 Introduction

    Chapter 1 Introduction Package Content (b) EB1504NET DVD unit (c) EB1504 NET unit (a) EB1740HB DVD unit (1) Please refer to above figure to check the unit that user has purchased: (a) EB1704HB DVD unit (b) EB1504NET DVD unit (c) EB1504 NET unit (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Power Cord...
  • Page 8 Display frame rate:Total 120/100 fps (NTSC/PAL) Hue/Brightness/contrast/Saturation adjustable Recording resolution Full D1: 720 x 480/720 x 576 (NTSC/PAL) CIF: 360 x 240/360 x288 (NTSC/PAL) Recording frame rate Full D1: 60/50 fps (NTSC/PAL) CIF: 120/100 fps (NTSC/PAL) Recording mode Schedule recording (00:00~24:00 set by hour) Continuous /Motion / Sensor recording Remote access Support CMS (Central Management System)
  • Page 9 Recording resolution Full D1: 720x480 / 720X576 (NTAC/PAL) CIF: 360x240 / 360X288 (NTAC/PAL) Recording frame rate Full D1: 60 / 50 fps (NTAC/PAL) CIF: 120 / 100 fps (NTAC/PAL) Recording mode Schedule recording (00:00~24:00 set by hour) Continuous /Motion / Sensor recording Auto recycle recording Auto record enabling Remote access...
  • Page 10 Recording frame rate Full D1: 60 / 50 fps (NTAC/PAL) CIF: 120 / 100 fps (NTAC/PAL) Recording mode Schedule recording (00:00~24:00 set by hour) Continuous /Motion / Sensor recording Auto recycle recording Auto record enabling Remote access Support CMS (CM3000) Support Remote Console Support PDAViewer (with video &...

  • Page 11: Front Panel

    Front Panel 1.3.1 EB1704HB DVD & EB1504NET DVD (10) Front Panel of EB1704HB DVD (10) Front Panel of EB1504NET DVD Name Function Start video recording. To stop recording, press Record Call up and exit the OSD main and sub menu Menu UP/DOWN/SELECT Use the UP and DOWN buttons to change setting and move to the left and right, and...

  • Page 12: Eb1504 Net

    1.3.2 EB1504 NET (10) (11) (13) (12) Name Function Start video recording. To stop recording, press Record Call up and exit the OSD main and sub menu Menu UP/DOWN/SELECT Use the UP and DOWN buttons to change setting and move to the left and right, and SELECT to enter or make a selection Use these buttons in playback mode to switch to display each channel in full 1/2/3/4/Quad...

  • Page 13: Back Panel

    Back Panel (1) (2) (11) (12) (13) (10) Name Function LAN Port For Ethernet connection Audio In Input the audio signal from a microphone or audio output device. The audio is embedded with channel 1 The audio input device with its own power supply is necessary. Audio Out Output the audio signal to a speaker The audio output device with its own power supply is necessary.

  • Page 14: Setting Up The Dvr Unit

    ® incompatibility caused by the usage of these hard disks, even if AVerMedia has expressly advised about the risk of such damages. The entire risk arising out of the use of any information attached here with is borne by the recipient.
  • Page 15 Connect the end of the IDE cable and the power Secure the hard disk inside the unit connector to the hard disk...
  • Page 16 EVENT LIST (search by event): EVENT LIST HARD DISK : MASTER Use the buttons to select from the list. Press ▲ ▼ 2006 / 05 / 03 13 : 26 : 34 13 : 26 : 50 2006 / 05 / 03 13 : 00 : 01 13 : 16 : 46 again to make the selection.

  • Page 17: Chapter 3 Osd Navigation Tree

    Chapter 3 OSD Navigation Tree The follow figure is an OSD menu tree map. To call out the OSD menu, press on the remote control. PASSWORD SETUP MAIN MENU VIDEO RECORD PASSWORD SETUP CURR ENT CA MER A 1 ANA LOG CA MER A SELECT PASSWORD SETUP...

  • Page 18: Menu Function

    Menu Function If the unit is currently recording the video, user may have to stop video recording to change the settings. Use remote control to navigate in the OSD menu. The red frame turns yellow when you are making a selection. OSD MENU Description MAIN MENU...
  • Page 19 OSD MENU Description MAIN MENU VIDEO QUALITY : CAMERA SELECT Select the video quality setting from BEST, HIGH, MEDIUM, GOOD, VIDEO RECORD AUDIO RECORD NORMAL or LOW. AUDIO MUTE RECORD MODE BEST – best record quality but less record hours RECORD FRAMERATE LOW –...
  • Page 20 OSD MENU Description 3. After entering the last number, the system will format the hard disk HARD DRIVE SETUP 4. It is done when the “HDD FORMAT COMPLETED” appears OVERWRITE ENABLED HD1 SIZE 156,012MB HARD DRIVE SE TUP HD1 USED 250MB OVE RWRITE ENABLED HDD FORMAT...
  • Page 21 OSD MENU Description NETWORK SETUP NETWORK SETUP: IP MODE STATIC Setup the network parameters for the internet or intranet remote monitor or NW ENABLE 0080 VIDEO PORT playback. UPGARDE PORT 5005 IP MODE: The system provides 3 types of IP setup mode – Static, DHCP, and PPPOE. buttons to go up and down and select IP MODE, and ▲...
  • Page 22 OSD MENU Description The DVR system will try to get an IP address from the DHCP server. A NETWORK SETUP DHCP IP MODE message window will show up as below: NW ENABLE VIDEO PORT UPGARDE PORT 5005 GET IP NOW! WAITING... When DVR system gets an IP address from DHCP server, the information will display as below: NETWORK INFORMATION...
  • Page 23 OSD MENU Description When DVR system get an IP address, the information will display as NETWORK SETUP IP MODE STATIC below: NW ENABLE VIDEO PORT 0080 NETWORK INFORMATION UPGARDE PORT 5005 IP ADDRESS 000.000.000.000 000.000.000.000 SUB NET 192.168.153.254 GATEWAY 192.095.000.001 MAC ADDRESS 00.00.00.00.00.00 CHANGE...
  • Page 24 OSD MENU Description NETWORK SETUP UPGRADE PORT: STATIC IP MODE A port for the remote update DVR system firmware. Any port can be NW ENABLE 0080 VIDEO PORT assigned as an upgrade port, except the ports are already used by the UPGARDE PORT 5005 network services.
  • Page 25 OSD MENU Description DVD BAKCUP DVD BACKUP: TIME SET To backup the recorded files on DVD±R/DVD+RW by DVD-RW. There are START : 2006 / 05 / 04 10 : 00 : 01 some matter needing attentions that show as following: : 2006 / 05 / 05 13 : 08 : 13 The maximum backup file is 4.2GB for each DVD±R/DVD+RW...
  • Page 26 OSD MENU Description SUBMENU AUTO RECORD : AUTO RECORD MULTIPLE REMOTE Enable/disable auto continue recording when interrupted (i.e., power REMOTE ID breakdown, video playback or configuration setup). It continue recording VIDEO SYSTEM NTSC after 10 second of idleness. This is applicable in Always Record mode. PASSWORD SETUP VIDEO ADJUSTMENT TIME SETUP...
  • Page 27 OSD MENU Description VIDEO ADJUSTMENT VIDEO ADJUSTMENT : CAMERA Select the camera number and set to adjust the video brightness, contrast, BRIGHTNESS CONTRAST hue, and saturation value. SATURATION RESET TO DEFAULT VALUE TIME SETUP TIME SETUP: DATE 2007 / 03 / 12 15 : 45 : 57 Setup system date, time, daylight saving, and enable auto synchronize time TIME...
  • Page 28 OSD MENU Description SENSOR SETUP SENSOR REC TIME : SENSOR REC TIME 010 SEC Set the amount of time (in second) to start record when the sensor has ALARM OUT TIME 010 SEC CHANNEL - 1 NOT INSTALLED triggered CHANNEL - 2 NOT INSTALLED CHANNEL - 3 NOT INSTALLED...
  • Page 29 OSD MENU Description PTZ SCAN PTZ SETUP: CAMERA To enable PTZ camera control by remote control and setup PTZ camera PTZ CONTROL PTZ ID parameters. PROTOCOL PELCO-D BAUD RATE 2400 Press and select SUBMENU → PTZ SETUP. AUTO PAN DWELL TIME 05 SEC Use the to go up and down to select the item and...

  • Page 30: Chapter 4 Using The Usb Playback Console

    Chapter 4 Using the USB Playback Console Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR 256 MB Graphic function must support DirectDraw Audio card or built-in Speaker 1 available USB2.0 port Installing the USB Playback Console To install the USB Playback Console: Place Installation CD into the CD-ROM drive.

  • Page 31: Running The Usb Playback Console

    Running the USB Playback Console To run the application, click the icon on the PC desktop (13) (12) (11) (10) (14) (15) (2) (3) Name Function Exit Exit/ Minimize the application or chose Cancel to go back to the application. About: shows DVR application version information.
  • Page 32 Name Function (5) Open File To select the video file for playing. The playback application supports *.dvr and *.avf file type. - DVR Recorded File (HD): To playback the recorded video from the hard disk which was recording video on the DVR system. (see aslo Chapter 4.3.2) - Backup File(.dvr): The file is backup and save in *.dvr file format.

  • Page 33: Chapter 5 Backup Recorded Video File

    Name Function Source Disk To select the hard disk drive (10) Target Path To locate on where user wants to save the file (11) Event (%) Display the backup progress rate of event in percentage (12) Total (%) Display the total backup progress rate in percentage (13) Stop Stop backup progress (14) Start...

  • Page 34: Chapter 6 Imageverification

    Chapter 6 ImageVerification Image Verification is a watermark-checking program to identify the authenticity of a saved image (e.g. by snapshot). This program can only verify uncompressed bmp image files. To Run the ImageVerification To run the ImageVerification application, click the Watermark button on USB Playback Console main interface.

  • Page 35: Chapter 7 Ienhance

    Chapter 7 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video picture quality, segment and save the selected portion of the video, zoom in and out the image, and print or save the screen shot.

  • Page 36: To Use Istable

    Name Function (14) Effects Gray Scale: convert the image into black and white (monochrome). Normalize: adjust the brightness intensity. Equalize: automatically adjust the images that are too dark. De-interlace: smooth out the overlying frames. Static: de-interlace for motionless scene. Dynamic: de-interlace for moving scene. (15) Picture Adjust the Brightness, Contrast, Saturation, Hue and Gamma.

  • Page 37: Chapter 8 Using The Remote Programs

    Chapter 8 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature, make sure that you PC and DVR server both are connected to the internet and the Network feature is enabled.
  • Page 38 Changing the Superuser and User default password is strongly recommended.

  • Page 39: Familiarizing The Web Viewer Buttons

    Familiarizing the Web Viewer Buttons Right-clicking on the Web Viewer video screen, enables you to start video recording, change video quality, switch camera and enable/disable DirectDraw. Name Function (1) DirectDraw Enhance the video quality. Not all graphic cards can support this function. If you can not see the screen display correctly or screen is messed, please check with VGA card vendor.
  • Page 40 Name Function (12) Select cameras to Select to the view camera from different server. In Select Camera dialog box, Display view column, click to enable/disable viewing the camera. Click Add Server and select the server type between DVR and IP Cam to add. Click Delete Server to delete the selected item.

  • Page 41: To Setup Remote System Setting

    8.1.1 To Setup Remote System Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies to Remote DVR system only. After changed the DVR system setting, refresh your web browser in order to apply the new setting to the DVR system.

  • Page 42: Camera Setup

    (4) DLS Setup daylight saving settings. Enable DLS To enable/disable daylight saving function. START Setup daylight start up date and time. Setup daylight stop date and time. TIME OFFSET Assign a time that it is for daylight saving time offset in your time zone. For example: if the time zone is in U.S.
  • Page 43 IP Camera(only support for EB1704HB DVD) Protocol / Resolution When the camera is an IP camera, select the protocol and resolution of IP camera. Fill in the IP address and connection port of IP camera. URL Command iii. If the IP camera has a URL address instead IP address, user can enter the URL address for IP camera connection.

  • Page 44: Record Setup

    8.1.1.3 Record Setup (1) Record Select Enable/disable the channel number to record video The channels which could be recorded should be enabled in the CAMERA SELECT first. (2) Audio Record CH Enable/disable channel number audio recording. To record sound, make sure the microphone is connected to the unit (3) Record Mode Select D1/CIF recording mode.

  • Page 45: Alarm/Sensor Setup

    (8) Motion Detection Motion Camera Enable/disable the channel number to detect motion. Motion Record Time Set the amount of time (in second) to record when a motion has detected. Sensitivity Set the sensitivity level. The sensitivity is from high, 9~ 2 and low. 8.1.1.4 Alarm/Sensor Setup (1) Alarm Setup...

  • Page 46: Network Setup

    Enter the domain name that user wanted. Auth Key A password use to access DDNS to register the domain name. MAC address of the DVR system is the key for user to register the domain name on AVerMedia DDNS web site. To find...
  • Page 47 MAC address of your DVR system, follow the steps below: 1. In OSD menu, select NETWORK SETUP IP MODE 2. Select any one of IP mode IP MODE STATIC 192 . 168 . 153 . 100 IP ADDR ESS 255 . 255 . 255 . 255 3.

  • Page 48: User Setting

    8.1.1.6 User Setting Click Remote setup button on Web Viewer main interface, and then, click User button to change password of user accounts. (1) Superuser Change the remote accessing password of superuser. Superuser has the authority to remote setup the DVR system configuration on Web Viewer. - Password Enter the new password - Password Confirm...

  • Page 49: Familiarizing The Remote Console Buttons

    Familiarizing the Remote Console Buttons (12) (11) (10) (13) Name Function (1) Exit Close the Remote Console. (2) Audio button Enable/disable the sound. (3) Split Screen Mode Select from six (6) different split screen type to playback the recorded video file of all the camera, or one camera over the other or alongside on a single screen.

  • Page 50: To Setup Remote Console Setting

    8.2.1 To Setup Remote Console Setting Click Setup button to call out the System Setting windows. Click OK to exit and save the setting and Cancel to exit without saving the setting. (1) Storage Path Set the directory on where to save the data. When there is not enough free space to record one hour data, the system automatically replaces the oldest data.

  • Page 51: Familiarizing The Webviewer Ptz Buttons

    Familiarizing the WebViewer PTZ Buttons Name Function (1) Direction buttons Adjust and position the focal point of the PTZ camera. Click the center to pan automatically. (2) Zoom +/- Zoom in and out the image. (3) Select PTZ Choose to enable/disable the PTZ camera. In the Select PTZ dialog box, Select column, click to enable/disable viewing and controlling the PTZ camera.

  • Page 52: Using The Remote Playback

    Using the Remote Playback To use this feature, first you need to select the source of the file. Click the Playback button. And then, in the Select Playback Mode dialog box, choose Local Playback to open the file that is recorded in the Remote Console, and Remote Playback to open the file that is recorded in the DVR server.

  • Page 53: Chapter 9 Using Handyviewer To Access Dvr Server

    Chapter 9 Using HandyViewer to Access DVR server Users can use a mobile phone to access the DVR through Internet. Make sure your mobile phone support IE browser and is connected to the internet. To access the DVR server, open IE browser and enter http://enter server IP or domain name here/mobile.

  • Page 54: To Install Pdaviewer From The Internet

    9.1.2 To install PDAViewer from the Internet Make sure you are connected to the internet. 1. Open the web browser and enter the server IP. Then click the hyperlink Download PDA-Viewer. 2. When the Download dialog box appears, enable Open file after download and click Yes.

  • Page 55: To Use The Pdaviewer

    9.1.3 To Use the PDAViewer 1. Run the PDAViewer in the Programs. Familiarizing the PDAViewer buttons (10) Name Function (1) Connect Hook up to the DVR server. Make sure you are connected to internet. When the iView screen appears, click Add to add DVR server. Enter the server IP, port, user ID, password and select the connection type.

  • Page 56: Using Javaviewer To Access Dvr Server

    11. User can change the relay status. Select the relay and tap on video screen longer the pop up menu will appear, and then, select the status (ON, OFF, Trigger) Using JavaViewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the DVR through Internet. Make sure your mobile phone supports Symbian Smart Phone OS and can be connected to the internet.

  • Page 57: To Use The Javaviewer

    9.2.1 To Use the JAVAViewer Run the JAVAViewer program. Enter the DVR IP address, port number, user ID, and password. Please refer to your DVR server setting for that information. And then, select the Connect to connect to DVR server. Click Yes to accept the data from DVR server.

  • Page 58: Chapter 10 Using Central Managment System

    Chapter 10 Using Central Managment System ® The AVerMedia CM3000 is a central management system that enables user to monitor up to 1000 DVR servers (optional) through an internet connection. The CMS system also automatically records and displays video when an event has occurred on the remote side of the DVR server. You can also playback video files locally or download from a remote DVR server.

  • Page 59: Installing The Cm3000 In Windows Xp/2000

    10.2 Installing the CM3000 in Windows XP/2000 1. Place the installation CD into the CD-ROM drive then click Utility. And select the CM3000 folder and click setup.exe. And then, follow the on-screen instructions. 2. Please carefully read the license agreement. Click Yes to accept the agreement.

  • Page 60: Using The Cm3000

    10.3 Using the CM3000 10.3.1 Running the CM3000 Software To run the application, double-click on your PC desktop or click Start > Programs > DSS > CMS > CM3000. For security purposes, some of the features would require you to enter a User ID and Password before they can be accessed.

  • Page 61: Using The Cms Application

    10.3.2 Using the CMS Application When an alarm occurred on the DVR server, the video is transmitted to the CMS and played on the CM3000 main screen. The transmitted video is approximately 3 seconds long. You may download and playback the complete video directly from the DVR server. The video stream before the eye indicates the latest occurrence.
  • Page 62 Name Function To get the register serial number, please contact your local dealer and give activator key of product. And then, user will have the register serial number to complete product registration and also CMS system will be upgraded to 1000 DVR servers management. (2) Monitor (F4) Switch to display live video from the selected DVR servers group.

  • Page 63: Customizing The Cms System

    10.4 Customizing the CMS System In the CMS application, click the button to customize the CMS system. When the CMS configuration setup selection appears, select and click the buttons you want to change the setting. 10.4.1 System Setting In the System Setting dialog box, click OK to accept and start to reload the new setting, and Cancel to exit without saving.

  • Page 64: To Set The System To A Different Language

    4. The text below the Alarm Record path text box shows the hard disk free space and total space in parenthesis. 5. In the System Setting dialog box, click OK to start reloading the new setting and Cancel to exit without saving the new setting.

  • Page 65: Camera Setup

    4. In the DVR Setup section, click Add to insert, Delete to remove and Edit to modify DVR server setting. 5. To continue adding a DVR, in the text box, enter the name, IP/Domain, Login User, Password, Confirm Password of the remote DVR server. 6.

  • Page 66: E-Map Setup

    select the DVR server. 7. Click OK to save the setup. To exit without saving, click Cancel. 10.4.4 E-MAP Setup Holds up to 64 maps in *.bmp/*.jpg format. The map is hierarchy in structure and users can add a map on another map.
  • Page 67 10.4.4.1.1 Add a New Map Click button In the Authorization dialog box, enter the administrator User ID and Password Click E-Map button Click Add Map button and the Map setting window will show up. Give a name for the new map. Click to locate the map file.

  • Page 68: To Use The E-Map

    4. Click Add DVR button and the Add DVR window will show up. 5. Select the DVR server from the Add DVR window and click OK. 6. User may now drag and move the DVR icon to its place on the map. Non-active white DVR icon cannot be placed on the map.
  • Page 69 (1)Mail Server Enter the SMTP Server and port. If your e-mail system requires user identification, enable the Authentication check box and enter User ID and Password. (2)Mail To check if it is working, click the Test Account button. Enter the sender e-mail address. From: To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).

  • Page 70: User Setting

    5. You may now set to send thru SMS &/or MMS. If you enable SMS setting, just enter the message in the text box. If you enable MMS, enter the APN name, WAP IP, MMS address and the message. If you are not sure, please contact your mobile service provider. 6.

  • Page 71: Using The Playback Function

    10.5 Using the Playback Function User can choose to playback video stored on the local hard disk or download the video from the remote side of the DVR server. 10.5.1 To Playback the video 1. Click 2. In the DVR Playback select window, select DVR server and Local Playback to play video from the local hard disk or Remote Playback from the remote DVR server.

  • Page 72: Using The Local Playback Application

    10.5.2 Using the Local Playback Application (17) (16) (15) (14) (13) (12) (11) (10) Name Function (1) Split Screen Select from six (6) different split screen types to playback the recorded Mode video file of all the cameras, or one camera over the other or alongside on a single screen.
  • Page 73 Name Function toggle to only display one of the video in the multiple-screen mode or all. (14) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second (See also 9.5.3.2). (15) Find Next Search for the next event or changes in the motion detector frame. You can use this when you are using Intelligent Search or Event Search only.

  • Page 74: Using The Remote Playback Application

    10.5.3 Using the Remote Playback Application Name Function (1) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track. (2) Playback Begin: Move to the beginning of the recorded video file. Control Buttons Previous: Go back to the previous frame.

  • Page 75: To Search Using The Visual Search

    10.5.3.2 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the date. Then click OK. 3. When a series of frames appear by date, click on the frame to display another series of frames and search by every Hour of that date, every Minute of that hour, every 10 Seconds of that minute, every Second of that 10 seconds.

  • Page 76: To Search Using The Event Search

    10.5.3.3 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text (red) would appear at the lower left corner of the screen. 3. In the Event Search Setting dialog box, check the type of condition you want to search. If you select POS, in the Find Text box, type the word.

  • Page 77: Using The Event Viewer

    10.5.4 Using the Event Viewer Show the record of activities that take place in the system. To filter the records, select and click the option button to only display Alarm, Motion, DVR Reboot, HDD fail, Login DVR, Connection Success, Connection Loss or All Event. Click Refresh to update the list and Save to save the list in *.txt format.

  • Page 78: Appendix A Registering Domain Names

    Appendix A Registering Domain Names DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating domain names into Internet addresses. It allows remote clients to intelligently search dynamic servers without any previous enquiring for servers’ Internet addresses. In order to take advantage of this intelligent service, first register your domain name on the following Web site http://ddns.avers.com.tw 1.

  • Page 79: Appendix B Dual Monitors Setting

    Appendix B Dual Monitors setting Video configuration is different for each different VGA chipsets. Please follow the steps below to setup the dual monitors display. Graphic card with ATi chipset 1. Enter the ATI Catalyst Control Center, user can click the short-cut or right click on the screen. 2.
  • Page 80 5. If user selected the Advanced mode, click the View button. 6. In Display Manager, right click on the second Display on the right side and select Extend Main onto monitor. 7. Adjust each monitor resolution to 1024x768.

  • Page 81: Appendix C Network Service Port

    Appendix C Network Service Port The following table shows the ports that DVR server uses for certain network service. Port# Variable Remote Console WebViewer CM3000 5005 Firmware Update 53/1053 DVR DDNS (Upload / Download)
  • Page 82 Any other cause which does not relate to a product defect 3. Cartons, cases, batteries, cabinets, tapes, or accessories used with product 4. AVerMedia does not warrant that this product will meet your requirements; it is your responsibility to determine the suitability of this product for your purpose WHAT WE WILL AND WILL NOT PAY FOR We will pay labor and material expenses for covered items.

This manual is also suitable for:

Avedigi eb1504net dvdAvedigi eb1504 net

Table of Contents