Operating Your Wine Cellar; Recommended Temperature Settings; On/Off Power; Setting The Temperature Control - Cavavin C-050WDZ Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

It is recommended you install the wine cellar in a place where the ambient temperature is between
19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 5ºC-18ºC (40ºF-65ºF) may
not be reached.

Recommended temperature settings

Wine conservation: 12°C-14ºC (53°F-57ºF)
Rose and sparkling wines: 5°C-8ºC (41°F-46ºF)
Dry/white wines: 9°C-12ºC (48°F-53ºF)
Red wines: 14°C-18ºC (59°F-65ºF)

ON/OFF Power

To turn OFF the appliance, press the

Setting the temperature control

You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display
window.
The temperature range of lower zone is 12º-18ºC (54-65ºF) which is suitable for storing white and
red wines. The temperature range of upper zone is 5º-13ºC (40-56ºF) which is suitable for storing
sparkling and white wines.
If you desire to change the temperature, set the temperature as you desire by touching the
button. Touch the
zone. The numbers in the display window will flash. The temperature that you desire to set will
increase 1ºF or 1ºC if you touch the
1ºF or 1ºC if you touch the
When you store mostly red wines, the temperature which you control by touching the above two
buttons need to be set at 15ºC-18ºC (59ºC-65ºF).
When you store mostly white wines, the temperature needs to be set at 9ºC-14ºC (48ºF-57ºF)
When you store mostly sparkling wines, the temperature needs to be set at 5ºC-8ºC (40ºF-47ºF)
The temperature inside the unit will be appeared in blue color in the display window.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the wine cellar will not
start.
When you use the wine cellar for the first time or restart the wine cellar after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the wine cellar is running for a few hours everything will be back to normal.

OPERATING YOUR WINE CELLAR

button and hold 2 seconds.
button once to select the lower zone and once more to select the upper
button once; on the contrary the temperature will decrease
button once.
25
or

Advertisement

Table of Contents
loading

Table of Contents