Page 7
4-2. Install FTDI VCP Drivers Verifying Driver Installation: To verify that driver installation has completed successfully, you can open the -click My Computer, select Properties). In the System Properties windows, select Hardware, Device Manager. -PC\Ports (COM & LPT) Confidential...
Page 8
5-1. Install Libusb-win32 Install inf-wizard: USB Serial Converter A (Interface 0) Confidential...
Page 9
5-2. Install Libusb-win32 Verifying Driver Installation: To verify that driver installation has completed successfully, you can open the -click My Computer, select Properties). In the System Properties windows, select Hardware, Device Manager. One USB Serial should be listed under MY-PC\Ports (lib usb- win32 devices) DONE Confidential...
Page 10
6-1. Install Cygwin Install Cygwin: 1. Install Cygwin from: http://www.cygwin.com/setup_x86.exe (for x86 32-bit systems) or http://www.cygwin.com/setup_x86_64.exe (for x86 64-bit systems) 2. Select the option Install from Internet 3. Use default installation path: c:\cygwin. If you chose an alternate installation directory, please make sure that there are no spaces in the path.
Page 14
Process C:\cygwin\Cygwin.bat Confidential...
Page 15
Key in command : cd /cygdrive/c/cygwin/OpenOCD Confidential...
Page 16
8-1. Burning Normal F/W Check config8801.txt, layout.txt files in OpenOCD folder Check files name Confidential...
Page 17
8-2. Burning Normal F/W Key in command : ./flashprog.sh -l layout.txt -b config8801.txt Confidential...
Page 18
8-3. Burning Normal F/W Burning information print as followed: Note : Please restart DUT after burning (Plug-in and Plug-out USB) Confidential...
Page 19
9-1. Run normal F/W Open OS terminal and set USB comport (reference to page9 ), set baud- rate as 115200 115200 Confidential...
Page 20
9-2. Run normal F/W Enter help on the screen to see a full list of commands available for use That will scan around AP wlan-scan Confidential...
Page 21
10-1. Burning MFG F/W Check config8801_mfg.txt, layout.txt in OpenOCD folder Check files name Confidential...
Page 22
10-2. Burning MFG F/W Command : ./flashprog.sh l layout.txt b config8801_mfg.txt Confidential...
Page 23
10-3. Burning MFG F/W Burning information print as followed: Note : Please restart DUT after burning (Plug-in and Plug-out USB) Confidential...
Page 24
11-1. Run Marvel 88w8801 WIFI MFG tool Set USB comport Run Marvel 88w8801 MFG tool Confidential...
Page 25
11-2. Run Marvel 88w8801 WIFI MFG tool Confidential...
Page 27
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 28
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter...
Page 29
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à...
Page 30
This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna.
Page 31
installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 6100A-CU288”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs.
Need help?
Do you have a question about the AW-CU288 and is the answer not in the manual?
Questions and answers