Table of Contents
Advertisement
BROWNING CONTROL
The browning control regulates how much the bread
is toasted—in other words, the colour of the toast.
Lower settings produce lighter toast and higher
settings produce darker toast.
When setting the browning control, remember that
dry or thin slices of bread will toast quicker and
require a lower setting. Moist or thick slices of bread
will require a higher setting.
CANCEL BUTTON
The toasting process can be stopped at any time by
pressing the cancel button.
HIGH LIFT FEATURE
The high lift feature uses the loading handle to help
you to remove the toast. When toasting has finished,
simply lift the loading handle upwards from its rest
position to raise the toast and make it easier to
remove.
FROZEN BREAD FUNCTION
The frozen bread function allows you to toast bread
straight from the freezer. Insert the bread into your
toaster, press the loading handle down and then
press the frozen bread button. Your toaster will
extend the toasting time to allow the bread time to
defrost. Watch the toast to ensure that it doesn't
burn.
REHEAT FUNCTION
The reheat function will heat up toast that has cooled
or gone cold. Press the loading handle down then
press the reheat button. Keep a careful eye on the
toast to ensure that it doesn't burn. Don't use the
reheat function on buttered toast.
4
BEFORE FIRST USE
Never force bread into the toasting
slots. Bread should fit easily into the
toasting slots. Never toast slices of
bread that have been buttered. Take
extra care when toasting items that
contain sugar, jam or preserves, as
there is a risk of the ingredients leaking
into the toaster, causing overheating.
Don't use bent, damaged or broken
bread in your toaster as it may cause it
to jam.
Carefully remove your toaster from its box. Remove
all packaging from inside the toasting slots.
Position your toaster on a stable, secure, dry and
level work surface away from the edge. Bread may
burn therefore do not use the appliance near or
below combustible materials such as curtains. Never
use the toaster below wall cupboards or shelves.
Before connecting to a power source, make sure
your mains supply voltage is the same as the one
indicated on the appliance. Connect the plug to a
suitable power outlet and make sure that the power
cord does not overhang the work surface.
When you first use your toaster, there may be a
slight odour as the heating elements warm up for the
first time. This is quite normal and not a cause for
concern. To remove the odour, simply operate your
toaster for the first time without any bread in it.
USING YOUR TOASTER
1. Set the level of toasting using the browning
control. The higher the number selected, the
darker the toast will be.
2. Place the bread into the toasting slots. You can
toast one, two, three or four slices of bread.
Press the loading handle down until it latches.
The bread will be lowered into the toaster and
toasting will begin.
The loading handle will not latch if your toaster
is not connected to the mains supply.
3. If the toast is not done enough it can be toasted
again. Turn the browning control to a lower
setting and watch the toast to ensure that it
doesn't burn.
4. Toasting can be stopped at any time by pressing
the cancel button.
Advertisement
Table of Contents
