STEP 3:
PREPARE THE VENTING BLOWER
.ECKHA %
ROOM-VENTED (Recirculating)
INSTALLATION:
1. Remove one blower unit mounting screw and one
blower plate screw. Remove the blower plate from
cabinet. See Figure 19.
2. Carefully lift the blower unit out of the microwave
oven.
3. Rotate blower unit 90˚ so the exhaust ports face the
front of the cabinet. See Figure 20.
4. Place blower unit back into microwave oven.
5. Reattach blower plate to microwave oven. Attach with
the one blower unit mounting screw and then the one
blower plate mounting screw. See Figure 21.
.ECKHA
exhaust
ports
blower
unit
blower unit
exhaust ports
blower unit
— 12 —
blower plate
mounting screws
blower unit
mounting screws
.ECKHA &
blower plate
mounting screws
blower unit
mounting screws
.ECKHA '
blower plate
mounting screws
blower unit
mounting screws
.ECKHA