Table of Contents
Advertisement
Using the product recovery CD-ROMs
To manually change the partition sizes and perform a system recovery, proceed as follows:
1
Select the button next to Change Partition Size and Recover.
2
Click Next.
3
In the following screen, set the size of your C: drive in gigabytes, or choose to restore the default size by
pressing Default.
4
Click Next.
5
Read the summary of the recovery process about to be performed and click Next to start the process.
6
Click Yes to confirm.
7
When asked to do so, remove the CD and insert the next one.
8
When the process is finished, click OK.
9
Click Next in the window that appears.
10
Remove the CD from the drive and click Finish.
Your system's settings are changed and your computer reboots automatically.
Resetting the default partition sizes
If you changed the partition sizes since you bought your Sony computer, choosing Recovery To Originally
Shipped State allows you to reset the hard drive to its original size. Meanwhile, the current partitions are
deleted, the hard disk is reformatted, and all the original software is restored as with a standard system
recovery.
You should allow one hour for the recovery process.
To restore the default size of the hard drive, proceed as follows:
1
Select the button next to Recovery To Originally Shipped State.
2
Click Next.
3
Read the summary of the recovery process about to be performed and click Next to start the process.
n N
111
Advertisement
Table of Contents
