ATV KB5000N Instruction Manual
  1. Manuals
  2. Brands
  3. ATV Manuals
  4. Controller
  5. KB5000N
  6. Instruction manual

ATV KB5000N Instruction Manual

Keyboard controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KEYBOARD CONTROLLER
Instruction Manual
Please read this manual thoroughly before use and keep it handy for future reference

Advertisement

Table of Contents
loading

Summary of Contents for ATV KB5000N

  • Page 1 KEYBOARD CONTROLLER Instruction Manual Please read this manual thoroughly before use and keep it handy for future reference...
  • Page 4 WARNING AND CAUTION WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 5 FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
  • Page 6 IMPORTANT SAFEGUARDS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  • Page 7: Table Of Contents

    Table of Contents Chapter 1 — Introduction ........................1 1.1 Features ............................1 1.2 Package Contents ......................... 2 1.3 Required Installation Tools ......................2 1.4 Connectors ........................... 2 Chapter 2 — Installation and Configuration ................... 3 2.1 USB Configuration of Fastrax Dome System ................. 3 USB Keyboard Connection to the PC(ATVision IP Client Program) ............
  • Page 8 Chapter 5 — Install with DVR Series ..................... 25 5.1 Install with Standalone DVR Series....................25 5.2 Install with PC DVR Series ......................27 Chapter 6 — Operation .......................... 30 6.1 Keyboard Lock/Unlock (Hidden command) .................. 30 6.2 Controlling Multiplexer ......................... 30 6.2.1 Selecting Multiplexer ......................

  • Page 9: Chapter 1 - Introduction

    Chapter 1 — Introduction 1.1 Features This keyboard controller is capable of controlling dome cameras and providing remote control functions for a variety of external switching devices such as Multiplexers, Digital Video Recorders etc. A combination of 4 Keyboard controllers and 5 Multiplexers comprises a small matrix system (64x4) using its remote control functions and programmable macro functions.

  • Page 10: Package Contents

    1.2 Package Contents The package contains the following. Q’ty Description Keyboard controller CD(Instruction manual, ATVision IP and Driver) USB Cable 12VDC Power supply (SMPS) Power Cord 1.3 Required Installation Tools No special tools are required to install the KBD controller. Refer to the installation manuals for the other items that make up part of your system.

  • Page 11: Chapter 2 - Installation And Configuration

    Chapter 2 — Installation and Configuration 2.1 USB Configuration of Fastrax Dome System...

  • Page 12: Usb Keyboard Connection To The Pc(Atvision Ip Client Program)

    USB Keyboard Connection to the PC (ATVision IP Client Program) In order to use a USB keyboard, the following describes Keyboard installation. . 1) Connect the power to the keyboard. 2) Connect the keyboard to the PC by using a USB cable. You need to install the USB chip drivers. The driver is included in the CD or manufacturer's website.(http://www.ftdichip.com/Drivers/VCP.htm, the latest version is “2.08.24 WHQL Certified”...
  • Page 13 5) You need to install the ATVision IP. ATVision IP is included in the CD. Then run the client program. - Log in: Initial User ID and Password is “admin”. - Click the menu “ ”-> System Setup - You can creat a new Group and add the Camera...
  • Page 14 - You can Confirm added camera, Then you click the joystick setup button. - You set the port and press “connect” - Default settings: Baud rate (9600) / Stop bit (1) / Data bit (8) / Parity (None) 6) As follows: Client channel can be controlled. NO.

  • Page 15: Basic Configuration Of Fastrax Dome System

    2.2 Basic Configuration of Fastrax Dome System Figure 1 – Basic installation diagram...

  • Page 16: Configuration With Dvr

    2.3 Configuration with DVR. Figure 3 –installation diagram with DVR...

  • Page 17: Configuration With Mux

    2.4 Configuration with MUX. Figure 4 –installation diagram with MUX...

  • Page 18: Configuration Of Master And Slave Keyboards

    2.5 Configuration of Master and Slave Keyboards. Figure 5 –Master and Slave keyboard connection Note: Connect the DOME1 port of all slave keyboards to the DOME2 port of the master keyboard and set the DIP SW 1 and 2 as the figure above. This is not supported in “USB ON”.
  • Page 19 Master Keyboard Setting Slave Keyboard Setting 1. Dip switch the of S1 is "ON" Network 1.Baud Rate 2.Com Ports 3.USB : 4.Mux Config 5.Set Slave KBD Save and Exit Com Ports Network 1.Dome1 : Dome 1.Keyboard ID : 01 2.Dome2 : KBDTRI(or KBDDUP) 2.BPS : 9600 3.RS232 : Don’t care Save and Exit...

  • Page 20: Termination

    2.6 Termination. The first and last devices in an installation (dome and keyboard controller) must have the data line terminated by setting the DIP switch. Without proper termination, there is potential for control signal errors. Total length of the cable for communication should not exceed 4000ft (1 .2Km). Refer to Figure 6 for setting the dome camera and keyboard controller termination.

  • Page 21: Dip Switch Settings

    2.7 Dip Switch Settings. Termination and Master/Slave: Set the switches according to your configuration. Figure 7 – Keyboard DIP Switches SETTING DESCRIPTION Dome1 Termination Dome2 Termination Reserved Download On Download Off Slave Master Table 1 - S1 Switch Setting 2.8 Multiplexer Configuration Duplex setup: NOTE: Multiplexers to be controlled by the keyboard controller require a new ROM version.
  • Page 22 Set the multiplexer functions as follows: (Press the Menu key of the multiplexer to enter the Unit Options menu.) 9 Unit Options Unit Number: 001 (first Mux) or 002 (second Mux) Communication Type: RS 485 Baud rate: 9600 bps PORT: ** Protocol:** B (If you see this line, the multiplexer has the new ROM) ** The old ROM version does not show Protocol selection option.

  • Page 23: Chapter 3 - Keyboard Setup

    Chapter 3 — Keyboard Setup To setup the keyboard controllers, the user needs to setup the network, passwords and perform special tasks such as Uploading and Downloading programmed data from the dome cameras. To enter the Keyboard menu, press and hold CTRL and press MENU expressed as CTRL + MENU in the manual. You will see the following menu.

  • Page 24: Change Administrator Password

    Change Administrator Password Current PW : XXXX NEW PW : YYYY Confirm PW : YYYY Save and Exit This screen allows you to change administrator password. Enter 4 digits password and press ENTER . Factory Default setting is 9999. NOTE: Factory default Administrator’s password is 9 9 9 9 + ENTR . User password is 1 1 1 1 + ENTR If you forgot your own password, contact service personnel or distributor.

  • Page 25: Usb

    RS232 2400~38400 None/DVR1-5/PC-DVR/AUX IN KBDDUP: Keyboard + Duplex Multiplexer KBDTRI: Keyboard + Triplex Multiplexer AUX IN: outputs the auxiliary signal input to Dome1 (FASTRAX,PELCO only) NOTE: When the DVR is selected at a port, the other port displays the same DVR only. To change the DVR number at the other port, first change the current DVR number to none.
  • Page 26 Set MUX A Cam<- MUX 0001 This menu is for assignment the first level (A level) of MUX. Cam : Dome camera ID MUX : MUX ID : Input of MUX : Spot Output number of the MUX (01: master keyboard, 02: slave keyboard 1, 03: slave keyboard 2, 04: slave keyboard 3) 1.
  • Page 27 MUX A MUX A MUX B MUX A MUX B Dome ID Mux 01 Cam1 Cam2 Cam3 Mux 01 Dome ID Dome ID Cam4 Mux 02 → → Cam 1 Cam1 Cam5 → Cam6 Cam2 → Cam 2 → Cam3 Cam7 →...

  • Page 28: Set Slave Kbd

    Set Slave Kbd Set Slave Kbd 1.Slave KBD : OFF 2.MUX cont : OFF 3.DVR cont : OFF 4.Dome Menu : OFF 5.Slave KBD Unit Save and Exit This screen allows you set up Slave KBD controller, how many the slave KBD controller and Mux menu controllability and DVR menu controllability, etc.

  • Page 29: Time / Date

    1. Select the blank line (- - -) by moving the joystick down or up. 2. Twist the handle of the joystick clockwise, then the next camera number displays or press camera number and CAM key, if that number is not already defined, the camera number displays. 3.

  • Page 30: Lcd

    3.6 LCD 1.Contrast 2.Backlight Save and Exit - Contrast : 01~12 - Backlight : ON/OFF Data Bank 3.7 DATA BANK 1:Download-> 2:Download-> Exit(ESC) The data bank function allows you to download the programmed data from the selected camera and to upload the saved data of the keyboard to the selected camera.

  • Page 31: Initialization

    3.8 INITIALIZATION MAIN MENU To initialize the keyboard, select Initialization. 8.Initialization After Initialization, the keyboard returns it to the factory value. ARE YOU SURE? ENTER OR ESC 3.9 INFORMATION Information Show the keyboard main version and FPGA version. 1.Version: x.xx 2.FPGA : xx Exit(ESC)

  • Page 32: Chapter 4 - Slave Keyboard Setup

    Chapter 4 — Slave Keyboard Setup Master keyboard should be setup as following procedure. of S1 “OFF”. 1. Check for dip switch the 8 2. Press CTRL + MENU. Check Slave KBD setting “ON”. Network ▶ Set Slave KBD ▶ Slave KBD : ON Network ▶...

  • Page 33: Chapter 5 - Install With Dvr Series

    Chapter 5 — Install with DVR Series 5.1 Install with Standalone DVR Series When user wants to connect with DVR, proceed as the following order. Connect RS232 cable between RS-232 Port of DVR and RS232 of the Keyboard. (This connection enables DVR control remotely from KBD controller) How to setup the KBD controller.
  • Page 34 Select “System Information” on the system menu and change UNIT ID. C. Select “Camera” on the Device menu. Unit ID should be 1 up to 99. Unit ID is not allowed number “0”. D. Set “PTZ Device” and “ID” of the dome camera. Select RS232/RS485 after PTZ is installed, and then set-up as below table.

  • Page 35: Install With Pc Dvr Series

    After setting Unit ID, Camera, and RS232/RS485, installing dome camera is basically completed. Please refer to the manual of DVR for the other installation. Press the related number of the controller which is correspondent to unit ID of DVR. Then press DVR button and adjust unit ID of the controller Make sure if any change is appeared on screen when you press button of the controller for...
  • Page 36 4. How to setup PC DVR Switch the PC DVR on. If press setup button on the above screen, the below screen will be appeared. Select camera input number that dome camera connected. Then install as below to select set-up PTZ after checking PTZ box. Port : COM1 RX Device : Fastrax….
  • Page 37 5. How to PC DVR Remote setup If selects Setup on main menu, the below screen will be appeared. B. After selecting System and checking Remote control box, please install as below to select Setup remote control. Device ID is not allowed number “0”. Port : COM2 Baud Rate : 9600...

  • Page 38: Chapter 6 - Operation

    Chapter 6 — Operation 6.1 Keyboard Lock/Unlock (Hidden command) When the user leaves the control desk, he may wish to lock the keyboard controller to prevent unauthorized use. Pressing 7 7 7 + ENTER will lock the keyboard controller. Pressing 7 7 7 + ENTER while the keyboard is locked will open the password screen.

  • Page 39: Summary Of Keyboard Controls

    Pressing SPOT No. + SPOT + Camera No. + ENTER will switch the selected camera number to the specific spot monitor output of the multiplexer. The selected camera can be a dome camera or a standard camera. The Keyboard controller maintains control of the previously selected dome camera. It does not change the main output of the multiplexer.

  • Page 40: Keys For Dome Camera

    6.3.1 Keys for Dome camera Function Key Label Descriptions Displays the selected camera on the spot out of the multiplexer and allows the camera to be controlled by the keyboard controller, if the selected camera is a Camera dome camera. No.

  • Page 41: Keys For Multiplexer

    6.3.2 Keys for Multiplexer Function Key Label Descriptions Select Mux Select Multiplexer (e.g.; 1 or 2 + MUX) Puts the multiplexer in Full-Screen Mode of the selected camera Full Screen No. + Picture-in-Picture mode. 2 by 2 Displays view of four cameras. The remaining cameras can be Display sequenced in the lower-right window.

  • Page 42: Keys For Dvr [Dvr1-4, Pc-Dvr]

    6.3.3.1 Keys for DVR [DVR1-4, PC-DVR] Function Key Label Descriptions DVR ID Selection. (e.g.:1 or 2 + DVR). Id Selection Enter the Quick Setup screen. You will need to enter the MENU administrator password to access the Quick Setup. Pressing the MACRO button also closes the current menu or setup dialog box.
  • Page 43 Function Key Label Descriptions First, it will reset the DVR’s outputs including the internal buzzer during Alarm an alarm. Second, it will display the event log when you are in the live monitoring mode unless there is an active alarm. [DVR1- 4]Select a highlighted item or completes an entry that you Enter have made.

  • Page 44: Example Of Key Operation In Pc-Dvr

    6.3.3.2 Example of Key operation in PC-DVR Function Key Label Live(Guard) Mode Playback Mode MENU NO ACTION MACRO Record Record ON / OFF Recall Preset Recall Preset No. + Search Go to Playback mode Stop Rewind NO ACTION Rewind one image X times Fast rewind NO ACTION...

  • Page 45: Dvr5 Protocol For The Dvr For The Version 3.1.0 And Over

    6.4 DVR5 protocol for the DVR for the version 3.1.0 and over Installation of the DVR5 protocol when one DVR is used. Note: When you set the protocol to DVR5, the keyboard operates as the DVR’s keyboard only and you must install domes to the DVR only. RS232 When you control the PTZ camera by the DVR, follow as below.
  • Page 46 4. How to setup DVR: D. Switch the DVR on. E. Enter the Menu according to the DVR’s instruction manual. F. Change the Port to “RS232” of the remote control in the devices menu. G. Confirm matching the setup of RS232 with the keyboard. Ex: Baud Rate:9600,Data Bit:8,Stop Bit:1, Parity:None) H.
  • Page 47 Installation of DVR5 protocol when many DVR use. RS232 TO RS485 CONVERTER RS232 TO RS485 CONVERTER When you control PTZ cameras on many DVRs, you need RS232 to RS485 converter. PTZ cameras are connected to RS232 to RS485 converter by the RS232 port of the DVR and the keyboard is connected through the RS485 port of the DVR.
  • Page 48 Keys for Dome camera: Key Label Descriptions Camera 1..16 + CAM Displays the selected camera number. selection Cancels current inputs. Cancel Exits from currently running functions or menu, error status, etc. ALRM Alarm No Action Immediately calls Home function. Home HOME Deletes selected value or function in programming mode Pressing Prst will bring up the preset programming menu.
  • Page 49 Keys for DVR[DVR5] *See the DVR’s manual to know in detail. Key Label Descriptions DVR ID Selection. (e.g.:1 or 2 + DVR). DVR Selection Open a Pan/Tilt/Zoom screen which allows you to control properly configured cameras. Play/Pause Play recorded data / Pause playing. Play video backward at high speed.

  • Page 50: Appendix A - Usb Control Key

    Appendix A - USB Control Key Short Cut Key Function (USB On mode) NO. + Camera Channel Selected. NO. + Live Screen (Live1, Live2) Selected. MAIN Screen Channel (4CH /8CH /16CH) Selected. NO. + Full Window Selected. (Toggle) MAIN One Camera Channel Selected. PAN, TILT, ZOOM Controlled.
  • Page 51 101 + ON Shutter speed 1/4(PAL 1/3)sec Shutter speed 1/2 sec 102 + ON 103 + ON Shutter speed 1 sec 104 + ON WDR ON 104 + OFF WDR off 105 + ON Image Stabilizer ON 105 + OFF Image Stabilizer off * Some function may not operate according to the model.

  • Page 52: Appendix B- Short Cut Key

    Appendix B- Short Cut Key Short Cut Key Function PRST Pop up preset setup menu. TOUR Pop up Tour setup menu. Pop up Pattern setup menu. PTRN Pop up Auto Scan setup menu. SCAN NO.+PGM +PRST Store the current view at the selected number. Short Cut Key Function Short Cut Key...
  • Page 53 Short Cut Key Function Short Cut Key Function Image Flip ON Image Flip off 150 + ON 150 + OFF 151 + ON Origin Check 152 + ON Place the camera in the 0° area horizontally. Go to the normal speed 153 + ON Go to the slow speed mode 153 + OFF...

  • Page 54: Appendix C- Trouble Shooting

    Appendix C- Trouble Shooting If problems occur, verify the installation of the camera with the instructions in this manual and with other operating equipment. Isolate the problem to the specific piece of equipment in the system and refer to the equipment manual for further information.

  • Page 55: Appendix D -Specification

    Appendix D -SPECIFICATION ELECTRICAL 16 X 2 Line LCD Joystick Zoom handle Joystick Input Voltage 12 VDC Power Consumption 0.5A (6W) Communications RS-485/232 baud rate: 2400 ~38400 bps (default:9600bps) Dome1 Port (RS-485) Up to 127 dome cameras including 32 Alarm mode on. Up to 127 dome cameras including 32 Alarm mode on / Dome2 Port (RS-485) SLAVE KEYBOARD / DVR/MULTIPLEXER...

Table of Contents