Chapter 3.
Accessing
Internet
Network Camera
Modem
PoE Switch
Router
NVR
PC
Notification:
When you have a true IP address, you may need set your camera to a static IP
address. Then you may use an internet browser by entering this static true IP address
to access your network camera.
If your true IP address is going to your router, you may need to use port forwarding.
This is the solution that solves the problem when a surveillance project lacks a true IP
address for management. The performance of the camera will be strongly dependent
on the performance of the router. It may cause an abnormal connection.
<refer to 3.1. B. setting >
Internet and Intranet setting structure illustration
www.comtrend.com
P 10