Table of Contents
Advertisement
5. Tap on each channel to rename it. (Up to 0
characters including space are allowed). Tap
if completed. Tap
to exit.
To remove sensor:
To remove any sensor from the weather station, Tap
Remove station on STATIoN
screen, all the sensors will be
removed at the same time.
To reposition the sensors on
screen:
1. On STATIoN screen, tap
. Press and hold
at the
right side of a sensor. Drag it
to your desired position.
3. Tap
to confirm.
SETTINGS
You can set your weather station through the
application, such as measurement units.
The settings are as follows:
•
Temperature
•
Barometric (with optional BTH sensor)
•
Rainfall (not available in RAR13HG)
•
Wind speed (not available in RAR13HG)
•
Altitude (not available in RAR13HG)
•
Show unavailable sensor
.
8
•
Automatically sync time
•
Show sea level pressure (not available in RAR13HG)
To select the measurement unit:
1. Tap
to view the measurement unit options.
. Tap on your desired unit.
3. Tap
to go back to the previous screen.
Advertisement
Table of Contents
