Related Manuals for Gear Head MS-148OR-S2
Summary of Contents for Gear Head MS-148OR-S2
- Page 1 2.4 GHz Wireless Optical Nano Mouse User Manual PID#:111383/384/385/386/603-109289 PID #: 111625/626/627/628-109289 Rev. 140408...
-
Page 2: User Record
All brand name and trademarks are the property of their respective companies Mac and Mac OS X are registered trademarks of Apple Inc. Windows, Windows XP, Windows Vista, Windows 7 and Windows 8 are registered trademarks of Microsoft Corporation in the United States and/or other countries. USER RECORD To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user manual. - Page 3 CAUTION The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
Page 4: Package Contents
10.3 and above (Tilt-Wheel function is compatible with PCs only) An available USB port SPECIFICATIONS Your new mouse complies with the following specifications: USB Interface Note: In order for the tilt-wheel function to work on your mouse you MUST download the setup software from the Gear Head website. -
Page 5: Installing Batteries
INSTALLING BATTERIES To properly install batteries into your mouse, please follow the instructions below: 1. Remove the battery compartment cover from your mouse. 2. Install two AAA batteries into the battery compartment following the orientation guide in the battery bay. 3. -
Page 6: Installation
INSTALLATION For All Operating Systems 1. Make sure you have successfully installed the batteries into your mouse. Refer to the Installing Batteries section in this manual if necessary. 2. Pull out the Nano Receiver stowed in the bottom of your mouse. 3. - Page 7 In order for the tilt-wheel function to work on your mouse you MUST download the setup software from the Gear Head website. 1. Go to the Support page (http://pcgearhead.com/support.php) on the Gear Head website and click the DOWNLOAD: DRIVERS, MANUALS, OR SOFTWARE button.
- Page 8 3. Find Model MPT3000/ MPT4000 and click get downloads…. (NOTE: Please check the FCC ID number on the rating label which is located under the mouse. Then follow FCC ID number to download relevant software.) FCC ID （ （ （ （ A） ） ） ） FCC ID （...
-
Page 9: Installing The Setup Software
4. A pop-up window will appear to initiate the download; click Download to start downloading. 5. Follow the onscreen instructions to download the setup software. INSTALLING THE SETUP SOFTWARE 1. Decompress the downloaded software and click the Set Up icon to begin installation. -
Page 10: Using The Software
USING THE SOFTWARE Button Assignment Advanced Functions Single/Macro You can assign any key function or key combination You can assign a function to a single button on your to any button of your mouse. mouse by selecting from Basic The drop-down menu the functions stored in the Commands provides 9 basic word... - Page 11 Switch You can set the functions of your mouse Pan Right Profile buttons to go to a specified mouse Button Off configuration profile, every time that mouse button is clicked. Cycle of Switch Profile You can rotate between the 5 profiles you have set by clicking the assigned mouse button.
- Page 12 CHANGING THE SPEED OF YOUR MOUSE To adjust the speed of the cursor or the scroll button features on your computer, follow the instructions below: NOTE: The screenshots show in this section are for demonstration only and your screen may look slightly different but with similar options.
-
Page 13: Warranty Information
Return Merchandise for Service Any claim under this warranty must be made in writing to Gear Head, LLC, within 30 days after the owner discovers the circumstances giving rise to any such claim, and must include a copy of this warranty document, a receipt or copy of your invoice marked with the date of purchase, and the original packaging.