Table of Contents
Advertisement
MIX
You can mix audio sounds.
1. Press MIX on the unit.
"MIXER ON" is displayed. Select a desired
function for side 1 and play it. Mix is available in
all functions except USB 2 and Optical.
2. During playback, insert a USB device in USB 2
port and play it. side 2 is fixed as USB 2 function.
3. Move the cross fader to adjust the sound volume
of mixed sound.
Move it to the left to lower the volume of
side 2 and move it to the right to lower the
volume of side 1.
,
Note
y In MIXER ON mode,
- You can adjust the Tempo for USB function
1 or 2.
- If you press C/V, Z or N on the unit,
it works only for each side.
- If you press C/V, Z or N on the
remote control, it works for both side 1
and side 2.
- For operating, it is recommended to use
C/V, Z or N on the unit instead of
remote controls.
- Numerical, DELETE buttons do not work.
- You can use H/P MODE. (Page 39)
y If you turn off the unit in the middle of mixing
process, MIX mode turns to OFF.
TEMPO
You can adjust the Tempo for USB function from 50
(MIN) to 150 (MAX).
Rotate TEMPO A on the unit to adjust the tempo for
USB 1. Rotate TEMPO B on the unit to adjust the
tempo for USB 2.
,
Note
y The tempo is set as 100 if you turn the unit
on/off or fully stop.
y The tempo is kept when you pause and
resume play.
AUTO SYNC
When using Mixing, you can synchronize the tempo
of audio files being played in USB 1 and USB 2 by
pressing AUTO SYNC on the unit.
To stop it, press AUTO SYNC on the unit twice.
,
Note
y The tempo of music being played in USB 1 is
synchronized to that in USB 2.
y TEMPO A doesn't work when AUTO SYNC
is on.
y If USB 2 fully stops or function is changed,
AUTO SYNC function is cancelled.
y In case of below, AUTO SYNC error may occur
depending on the sound source.
- The silent section in the beginning of the
track.
- Intro or bridge section in which few
musical instruments appear.
- In cases where playback speed or tempo
of the song changes.
- In case that the data for BPM is provided
in real time, not the beginning of the song.
y If the song is being played too fast or slow,
press and hold AUTO SYNC.
' A UTO SYNC RE-ANALYZING' is displayed.
y AUTO SYNC is available only when USB 1 is
selected for side 1 and USB 2 is selected for
side 2 in MIXER/DJ STAR ON mode and both
are being played.
Operating
25
3
Advertisement
Table of Contents
