Advertisement
Features of your Alinea
2
3
4
1. 4 Bread slots
2. Defrost, Cancel and Reheat
button
3. Browning control
4. High-lift and QuickCheck
functions
2
TA2740_20EM1 (ANZ).indd 2-3
TA2740_20EM1 (ANZ).indd 2-3
TM
Toaster
6
5
5. Browning control
6. Defrost, Cancel and Reheat
button
7. Crumb tray (at rear)
TM
Using your Alinea
Plug the toaster into a 230-240 volt AC
power outlet and switch the power on.
1
Toasting Bread
1. Position the bread into the bread slot.
2. Select the desired browning setting using
the Browning Control.
Note: If toasting 1 slice or 2 slices, it is
recommended that you use a lower browning
setting to achieve your required result and to
prevent burning.
Important: Do not toast stale bread, rice
crackers or similar on a high setting as there
is a chance that they may catch fire.
3. Push the Toasting Lever down to
commence the toasting cycle.
4. When the desired browning is achieved,
the toaster will automatically stop toasting
7
and pop the toast up.
Toaster Functions
Cancel button
The Cancel button immediately stops any of
the toasting cycles. As a consequence of this,
the toast will pop up.
Reheat button
Press the toasting lever down and turn the
dial to the Reheat setting.
Defrost feature
The Defrost feature can be used to toast your
frozen bread. The colour of your toast will
brown according to the toasting setting you
have chosen. To activate this feature, turn
the dial to the Defrost setting.
TM
Toaster
5. If you need to remove the toast before
the cycle is complete, press the Cancel
button. The Cancel button will immediately
interrupt the toasting cycle and pop the
toast up.
Hot Surfaces
Do Not Touch
This symbol indicates, temperature of
accessible surfaces may be high when the
appliance is operating and for some time
after use.
High-lift lever
When toasting small pieces of bread,
crumpets or muffins we recommend using
the High-lift lever to prevent you from
burning your fingers.
TM
QuickCheck
feature
If you need to quickly check the progress
of your toast without stopping the toasting
TM
cycle, use the QuickCheck
feature. Simply
lift up the toasting lever to view the toast and
then release when you have finished. If the
toast is ready press the Cancel button.
7/16/20 15:51
7/16/20 15:51
3
Advertisement
