Installations; Removing Packing; Removing Transit Bolts - LG WD-10B8QDT Owner's Manual

Installation

■ Removing packing

Washer
Base Packing
WARNING
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation
! Keep all packaging well away from children.

■ Removing transit bolts

To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer,
remove the bolts along with the rubber bungs.
If they are not removed, it may cause heavy vibration, noise and malfunction
8
Spanner
Transit bolt
1. Remove the cardboard box and styrofoam
packing.
2. Lift the washing machine and remove the base
packing. This will require 2 or more people or
a lifting device.
3. Remove the tape securing the power supply
cord and drain hose.
4. Remove the inlet hoses from the drum.
NOTE
• Keep the spanner provided for future use.
1. Unscrew the 4 bolts with the spanner supplied.
2. Take out the 4 bolts along with the rubber
bungs by slightly twisting the bung.
NOTE
• Keep the transit bolts for future use.
3. Close the holes with the caps supplied.