Advanced Operation
Call Forward
➤
To use the Call Forward button sequence
➤
Follow the instructions in the following table, shown under "Button Sequence."
Some features require additional input, such as:
• Destination – If the destination is an outside number, press
destination. The CTX accepts destination numbers of up to 32 digits.
• Timer – This is a two digit entry representing how long (eight to 160 seconds)
your telephone should ring before forwarding the call. If you enter one digit,
you must press
• Pass Code – A four-digit code established by system programming to prevent
unauthorized changes. The code applies to the station to be forwarded; not to
the station entering the code.
In the following table, (Tone) means that a confirmation tone will play at that
Note
point in the sequence.
Table 2
Call Forward Procedure
Feature
Call Forward Any Call - Internal and Incoming Line Calls:
Forwards any call, whether an internal call or incoming line call.
All Calls
Busy
No Answer
Busy No Answer
Cancel
Call Forward - Incoming Line Calls:
Forward incoming line calls only.
All Calls
Busy
No Answer
Busy No Answer
Cancel
30
after entering the single digit.
ÆÃ
Extension (Ext.) button +
Ext. button +
(Tone) + Dest. No. (Tone)
Æ%!
Ext. button +
(Tone) + Dest. No. (Tone) + Timer +
Æ%"
Ext. button +
+ Dest. No. + Timer +
Æ%#
Ext. button +
(Tone)
Æ%$
Ext. button +
(Tone) + Dest. No. (Tone)
Æ% "
Ext. button +
(Tone) + Dest. No. (Tone)
Æ%!"
Ext. button +
+ Dest. No. (Tone) + Timer (Tone) +
Æ%""
Ext. button +
+ Dest. No. (Tone) + Timer (Tone) +
Æ%#"
Ext. button +
(Tone)
Æ%$"
Button Sequence
(Tone) + Destination No. (Tone)
Æ%
Æ
Strata CTX DKT3000/2000-Series Telephone 05/02
after entering the
ÆÃ
Æ
Æ
Æ