Installation Location Requirements; Clearances - LG STYLER S3WERB Owner's Manual

Hide thumbs Also See for STYLER S3WERB:
Table of Contents

Advertisement

14
INSTALLATION

INSTALLATION LOCATION REQUIREMENTS

WARNING
Styler. It is important to review this entire manual before installing and using the Styler.
The installation requires:
y A grounded electrical outlet located within
2 ft. (61 cm) of either side of the appliance.
WARNING
Do not install or store the Styler in an area where it will be exposed to water and/or
weather. Failure to follow this warning could result in risk of electric shock, injury, or product
damage or malfunction.

Clearances

CAUTION
The floor must be level, with a maximum slope of 1 inch (2.5 cm) under the Styler. If the
slope is greater than 1 inch (2.5 cm), the appliance cannot be leveled properly.
Do not install the Styler on a hollow or flexible platform. Doing so may cause excessive
noise and vibration and result in damage or injury if the product tips over.
56½ in.
(1435 mm)
16
/
in.
5
16
(415 mm)
Read all installation instructions completely before installing and operating the
15
/
in (385 mm)
5
32
y A sturdy floor to support the total appliance
weight of 183 lbs (83 kg). The combined
weight of any other laundry appliances
should also be considered.
2
/
in.
3
64
(52 mm)
23 in.
(585 mm)
72
/
in.
13
16
(1850 mm)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Styler s3rerb

Table of Contents