Beko HTV8744 X00 User Manual page 22

C
INFORMATION
• If you scroll to Cold Wash option and press
Temperature Adjustment button again,
the recommended maximum temperature
for the selected programme is displayed.
Press the Temperature Adjustment button
again to decrease the temperature.
Finally, Cold light indicating the cold
wash option appears on the display.
You can also change the temperature after
the washing has started. You can select the
desired temperature after washing starts but
you must do this before heating step starts.
5.7 Spin speed selection
Whenever a new programme is selected,
the spin speed recommended for
the selected programme is displayed
on the Spin Speed indicator.
C
INFORMATION
• It is possible that the recommended
spin speed value is not the maximum
spin speed that can be selected
for the current programme.
Press the Spin Speed Adjustment
button to change the spin speed.
Spin speed decreases gradually.
Then, depending on the model of the
product, "Rinse Hold" and "No Spin"
options appear on the display.
C
INFORMATION
• Spin Speed Adjustment button works only
backwards. For example, when you want
to select 1000 rpm when the display shows
800 rpm, you need to press the button
for several times until you reach 1000
rpm by going backwards from 800 rpm.
22 / EN
C
INFORMATION
• Rinse Hold option is indicated with "
" symbol and No Spin option
is indicated with "
5.7.1 If you want to spin
your laundry after the
Rinse Hold function:
- Adjust the Spin Speed.
- Press Start / Pause / Cancel button.
The programme resumes. Machine drains
the water and spins the laundry.
If you want to drain the water at
the end of the programme without
spinning, use No Spin function.
C
INFORMATION
• In programmes that do not allow
spin speed adjustment, when
Spin Speed adjustment button is
pressed, spin speed light does not
change and the buzzer is heard.
You can also change the Spin Speed
after the washing starts. You can select
spin speed by pressing spin speed
adjustment button after washing has
started but before the spinning step.
5.7.2 Auxiliary function
selection for drying
When a new programme is selected,
press Auxiliary Function Selection button
to adjust the drying option that is suitable
for the selected washing programme.
C
INFORMATION
• In programmes that do not allow drying
adjustment, when Drying auxiliary function
button is pressed drying light does not
change and the buzzer is heard.
" symbol.
Washer-Dryer / User's Manual