~50 mA.. Getting started Coating thickness gauge TW-6 is designed to measure the thickness of a steel, galvanized steel or aluminium sheet paint coating. The measurement resolution equals 10µm. The device is equipped with an internal EEPROM memory for 100 measurements which enables to check the results after the measurement is made.
You will see on the display Measur in the first line and Memory in the second line. The * symbol indicates the currently selected function. Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
Page 5
A * symbol appears next to the shown value. 140um WARNING! cApAcITy ’ of The devIce memoRy Is ResulTs exT sToRAGes WIll deleTe The oldesT oNes Zn/Al 140um Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
Page 6
You have to choose the „reference point” option in the substance function menu. During the measurement a Ref caption will appear on the display. If the result is negative, the thickness Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
Page 7
As ThIs mAy AffecT The opeRATIoN Please note that zeroing is worth to be made when the measurement conditions are changing (e.g. the temperature or humidity rises or falls). Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
Page 8
– the measurement is accurate up to 1µm (precise) For car paint coating thickness D=10 setting is good enough. Software version function - Soft Shows the currently installed software version. Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu...
Page 9
Guarantee TW-6 Guarantee TW-6 The guarantee period of this device is 12 months from date of purchase. Within this period the Producer guarantees a reliable function of the device, if operated correctly. The Producer takes responsibility for all workmanship or material defects.