18
User Settings
User Settings
Menu Settings
To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
1
2
Configure the options by moving the joystick up/down/left/right.
3
To return to the upper menu or set other menu items, move the joystick to ◄ or pressing (
4
If you want to exit the OSD menu, move the joystick to ◄ until you exit.
When you enter the menu, instructions on how to use the button will appear in the bottom right corner of the screen.
y
Quick Settings
Input
CAUTION
Your monitor's OSD (On Screen Display) may differ slightly from that shown in this manual.
y
Each option is described below.
Settings > Quick Settings
Brightness
Contrast
Volume
Color Temp
[PBP/PIP OFF]
Settings > Input
Input List
Selects the input mode.
Aspect Ratio
Adjusts the aspect ratio of the screen.
Full Wide
Original
Just Scan
y
PBP/PIP
You can select the various PBP or PIP combination.
Picture
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
NOTE
You can adjust Mute / Unmute by moving the joystick button to ▼ in the Volume menu.
y
Custom
The user can adjust it to red, green, or blue by customization.
Warm
Sets the screen color to a reddish tone.
Medium
Sets the screen color between a red and blue tone.
Cool
Sets the screen color to a bluish tone.
Displays the video in wide-screen, regardless of the video signal input.
Displays video according to the aspect ratio of the video signal input.
The aspect ratio is not adjusted from the original.
NOTE
The display may look the same for Full Wide , Original, and Just Scan options at the recommended
resolution (3840 x 2160).
General
Description
Description
/ Ok) it.