Pull the tray straight out from the
2
terminal.
With the IC side facing up, place
3
the docomo nano UIM card on the
tray.
Make sure that the cut corner of the
・
card is oriented properly.
Be sure to fit the docomo nano UIM
・
card into the tray so that it does not
shift.
Corner cut
Tray
IC
Tray
Turn the terminal horizontally and
4
insert the tray with the card and
press it straight into the slot.
Be careful about the direction to insert
・
of the tray.
Firmly press the
5
tray is all the way in, and make
sure that there are no gaps
between the terminal and cover.
Cover
Before Using the Terminal
Tray
parts until the
32