cineVision RV4000 User Manual page 37

DF-L72F1N-LS(GB) 04.6.28 11:5 PM 페이지36
Changing the TV Audio Channel
Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO+SAP Audio Signal
Stereo ➝ Mono (No display) ➝ SAP ➝ Stereo
• STEREO Audio Signal
Stereo ➝ Mono (No display) ➝ Stereo
• SAP Audio Signal
Mono ➝ SAP ➝ Mono
• MONO Audio Signal
Mono (No display)
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
OSD Menu Options for DVD
During DVD playback, press [DISPLAY] to show information about the current disc.
While the disc information is displayed, press [DISPLAY] again to show the disc
remaining time.
Title
Shows the current title number and total number of titles, and skips to the desired title number.
1
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
2
Use [...†] to select the 'Title' icon on the on-screen display. Press [ENTER] to display a submenu.
3
Use [...†] to change the numbers.
4
Press [ENTER] to confirm.
36
On-Screen Display Overview